Page 7 of 14 FirstFirst ... 56789 ... LastLast
Results 61 to 70 of 139
  1. #61
    Join Date
    Sep 2015
    Location
    Conroe, TX
    Posts
    918

    Default

    Hopefully it’s just a nice little soaking rain so the river doesn’t get trashed!
    Overkill is underrated

    2006 Supra 24SSV Gravity Games- traded but never forgotten

    2017 Supra SA 400

  2. #62
    Join Date
    Apr 2016
    Posts
    223

    Default

    I was on the river this weekend (Saturday). Randall at Bethy Creek said they've lost quite a few inches of water in the creek over the past few weeks, so be careful thru the cut.
    You HAVE to go thru the cut fully on plane at this point until you get past the slider. We did it (as we have before) and had no problems in our completely unloaded Craz w/all passengers in the bow (just in case). If this sketches you out, make plans to launch at the bridge. I don't think the above mentioned rain will be enough to correct it, but i hope i'm wrong.

    David, it might be advisable to get w/Rinkers and/or any officials for this event w/wave runners to help direct traffic thru the cut. could get quite dangerous w/multiple boats heading in and out at 30+ mph thru one lane.

    We were planning on coming up on Saturday, but won't be able to make it b/c i dinged my prop up dropping Cole off at the bridge. (wasn't paying attention and drifted into the concrete ramp). took just enough damage to cause a vibration i'm not comfortable with. SUX! (unless someone has a spare surf prop and puller they want to let me borrow?)
    Last edited by Pound; 07-30-2018 at 10:53 AM.
    2016 Craz

  3. #63
    Join Date
    Jun 2012
    Location
    Crosby TX
    Posts
    257

    Default

    Quote Originally Posted by Pound View Post
    I was on the river this weekend (Saturday). Randall at Bethy Creek said they've lost quite a few inches of water in the creek over the past few weeks, so be careful thru the cut.
    You HAVE to go thru the cut fully on plane at this point until you get past the slider. We did it (as we have before) and had no problems in our completely unloaded Craz w/all passengers in the bow (just in case). If this sketches you out, make plans to launch at the bridge. I don't think the above mentioned rain will be enough to correct it, but i hope i'm wrong.

    David, it might be advisable to get w/Rinkers and/or any officials for this event w/wave runners to help direct traffic thru the cut. could get quite dangerous w/multiple boats heading in and out at 30+ mph thru one lane.

    We were planning on coming up on Saturday, but won't be able to make it b/c i dinged my prop up dropping Cole off at the bridge. (wasn't paying attention and drifted into the concrete ramp). took just enough damage to cause a vibration i'm not comfortable with. SUX! (unless someone has a spare surf prop and puller they want to let me borrow?)
    What size prop r u running?


    Sent from my iPhone using Tapatalk

  4. #64
    Join Date
    Apr 2016
    Posts
    223

    Default

    OJ 945 15x13
    2016 Craz

  5. #65
    Join Date
    Jun 2012
    Location
    Crosby TX
    Posts
    257

    Default 2018 Moomba and Supra TX Jam!

    I’ll check when I get home but I think my spare is 15x12. That u can borrow if need b. I also have a prop puller


    Sent from my iPhone using Tapatalk

  6. #66
    Join Date
    Jun 2012
    Location
    Crosby TX
    Posts
    257

    Default

    If u get the prop in today they can probably have it back to u by Friday



    Sent from my iPhone using Tapatalk

  7. #67
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,369

    Default 2018 Moomba and Supra TX Jam!

    I have a spare OJ 14.25 x 14.5 or something like that and a puller as well.

    Don’t think I’m brave enough to go through on plain however, we may just try to load the front with people
    And if we start dragging too much we just hop out and push it. You brace folks keep on doing it though. I imagine going through on plain moves a lot of dirt out of there lol.


    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  8. #68
    Join Date
    Apr 2016
    Posts
    223

    Default

    Does our wakemakers discount apply to props? i may just order one and have it shipped to the house. If so, can someone pm me the code?
    2016 Craz

  9. #69
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by Pound View Post
    Does our wakemakers discount apply to props? i may just order one and have it shipped to the house. If so, can someone pm me the code?
    Sorry bud, the wakemakers discount does not apply to props. Bad timing but I think there is a Nettles prop repair voucher in the raffle.
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  10. #70
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,369

    Default

    Quote Originally Posted by Pound View Post
    Does our wakemakers discount apply to props? i may just order one and have it shipped to the house. If so, can someone pm me the code?
    As RC said there is a raffle for a prop repair by nettles and also a whole new prop by OJ being raffled off. The way I see it, you can’t afford to not come to the Jam!


    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •