Results 1 to 4 of 4
Thread: Moomba Max wind dam install
-
12-21-2017, 06:41 PM #1
Moomba Max wind dam install
Just wanted to post a few pics of the wind dam install in case anyone is considering the addition. My boat was not Spec’d with the wind dam from the factory. Ordered one and installed myself. Simple install with 10 screws. Make sure you have the track angles right to include proper clearance with the bottom of the center windshield section and it will go smooth.
Sent from my iPhone using Tapatalk2018 Max with a little extra weight here and there
-
12-22-2017, 12:44 PM #2
Good work and easy upgrade, is there a big cost saving not ordering it from factory? I've also painted the "moomba" to match my accent color of the boat, nice little touch.
-
12-22-2017, 02:11 PM #3
best option box that was checked with my last boat. this was a very nice feature when coming back to the dock on a chilly summer night.
it can be made pretty easy with a little bit of plastic from a wholesaler and some time.'06 Supra Launch 20SSV-gone but never forgotten
-
12-22-2017, 02:14 PM #4
It would have been a few bucks cheaper to order with the boat. I bought a boat that was already built and at a dealer. Unfortunately the dealer did not spec the wind dam.
I could have fanned something but took the easy way out and ordered the part.
Sent from my iPhone using Tapatalk2018 Max with a little extra weight here and there