Results 11 to 20 of 49
Thread: 20% off fae
-
12-04-2017, 11:57 AM #11
Can anyone comment on baffle removal and overall decibel level??
"Preliminary data suggests that removing the baffle improves engine performance."
I would imagine that removing the baffle would increase exhaust flow and likely increase decibel level....
I always was along the line of thought that not only was FAE better for rider health, it also quiets the boat down.2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
12-04-2017, 01:01 PM #12Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
Must have just changed that—mine installed in August has a drain plug support.
People react strongly to it for some reason, while the reality is you really can’t see it. It’s under platform and kind of obscured by the pipe itself. And, underwater...
Sent from my iPhone using Tapatalk
-
12-04-2017, 01:03 PM #13Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
Overall boat is quieter. Exhausting under water quiets the boat, even with baffle removal.
My boat runs better without the baffle—Supra SE with 440 Raptor. Seems to surf 100+ rpm lower at same surf setup.
Sent from my iPhone using Tapatalk
-
12-04-2017, 01:27 PM #14Member
- Join Date
- Sep 2017
- Location
- Memphis, TN
- Posts
- 81
did you have to drill into the hull? First time boat owner and the thought of me doing that is a little sketchy
2016 Moomba Helix
Brittany Blue and Gunmetal Flake
Full Wetsounds Upgrade
1100 FatSacs
-
12-04-2017, 01:42 PM #15Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
Some holes are re-used. You do have to do a little drilling, but it’s not intimidating. You seal it up as the new screw goes back in.
Sent from my iPhone using Tapatalk
-
12-05-2017, 12:02 AM #16
What’s the latest we can order for the discount
2017 Supra SA 400
-
12-05-2017, 10:37 AM #17
-
12-07-2017, 02:15 PM #18
Don't miss your chance before prices go up.
FAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers
-
12-10-2017, 03:32 PM #19
-
12-10-2017, 08:14 PM #20Senior Member
- Join Date
- Mar 2015
- Posts
- 134