I've become a dealer for FAE and I'm going to Start off with a sale. 20% OFF an FAE system. Options are unfortunately not on sale.

Below is the information for the 16/17/18 Moomba and Supra models.

A system for these boats is $520 (retail) for the brushed stainless finish, standard welds, and internal flapper FAE. Upgrading to the blended welds will be an additional $40. This is where they hand polish the outside welds for a more smooth, seamless look to the system. You also have the option of adding the cat-back system/baffle replacement to your boat as well, for an additional $20. (In regards to the Cat-back option: Many boats have a very restrictive muffler/baffle aft of the catalytic converter. The baffle restricts the exhaust diameter from 4” down to about 1-3/4”. Preliminary data suggests that removing the baffle improves engine performance. At this time we have only identified the baffle on the Indmar engine with a single exhaust outlet. If you have a different engine but are interested, look under the engine at the exhaust hose and see if there is a metal coupling tube in-line. Some boats (like Malibu and MB) have the baffle built into the exhaust outlet you removed when you installed your FAE.)
For the installation, you will need Boat Life and we recommend the use of Debond (for the outlet removal of the process). Both products are available through us, or can be purchased elsewhere. If you decide to purchase this kit through us, it is $60 and includes the Debond, Boat Life, and wooden shims. We are currently running an estimated 2 week turnaround (possibly sooner).

Pricing will be increasing Mid December so Order now.

If you have an older boat you can get the information/options on the website. Just go to you boat and follow the steps.
http://www.freshairexhaust.com/

Here are the options explained.
http://www.freshairexhaust.com/about-us/fae-options/

Message me to order
Please include year/model/options you want
Thanks Billy