Results 1 to 9 of 9
Threaded View
-
11-16-2017, 07:35 AM #1Junior Member
- Join Date
- Oct 2017
- Posts
- 15
Prop shaft to shaft log alignment
Got under boat and noticed my prop shaft was way off center to shaft log:
IMG_3332.jpgIMG_3331.jpg
This is probably common knowledge, but do I need to disconnect the shaft seal (I've got PSS) from log before going through the trouble of realigning everything else? I've already disconnected the 4 bolts from the couplings, but the prop shaft doesn't seem to want to move very easily and I did not want to break anything. I've found tons on info on aligning the prop shaft at the couplings (thanks Moomba Forum), but nothing on the shaft log. Thanks,