Results 11 to 20 of 25
Thread: Wanted: Enzo bags
-
11-16-2017, 12:05 PM #11
Just to clarify a couple of things here. The "Enzo" sac is a Fly High brand model sac that carries a manufacture part number W712. It is not discontinued by the manufacturer per their 2018 price schedule and should be obtainable through any current Fly High dealer. All Enzo sacs are Fly High but not all L shaped sacs are a W712 Enzo.
-
11-16-2017, 12:16 PM #122017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
11-16-2017, 12:59 PM #13
-
11-16-2017, 01:19 PM #14
If money is no object, then yes, but we're on a budget wake boat forum. I think most guys around here like to stretch a dollar if they can. The fly high enzo fits very well in the boats that stazi and RC own, and at significantly less than the price of custom bags. Obviously custom is best, but what are you gaining? It definitely isn't displacement in the case of stazi and RC. Although I have no experience with the SE that the op owns, so their may be huge gains in going custom in that boat. I would imagine ragboy would be able to tell him exactly what the difference is between the custom SE bags and the enzo's.
Sent from my SM-G930W8 using Tapatalk2016 Craz.
Enzo bags.
-
11-16-2017, 02:09 PM #15Obviously custom is best, but what are you gaining?
A custom also allows the designer to build a sac that best fits and molds to the boat. You can also design the sac to hold the ideal amount of ballast, where as a standard sac may not hold enough or capable of holding more. Not every boat locker needs a 102" long sac under the seats.
I would imagine ragboy would be able to tell him exactly what the difference is between the custom SE bags and the enzo's.
-
11-16-2017, 08:40 PM #16
Maybe I'm missing something here, but it seems like you're kind of overcomplicating things. I don't see why modifying pnp plumbing would be an issue. Worst case scenario you spend $5 If you need to extend a hose and buy a clamp. It's literally a ten minute job. You're still $395 better off than going custom.
Sent from my SM-G930W8 using Tapatalk2016 Craz.
Enzo bags.
-
11-16-2017, 09:50 PM #17Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
It’s become a bit of a moot point as I have found an angle to some customs made for the SE. At an irresistible price point. I am going to see how it plays out before ordering my own customs. Standby MLA—if full bore customs I will hit you up!
Sent from my iPhone using Tapatalk
-
11-16-2017, 10:23 PM #18
Lead not an option?
Sent from my iPhone using Tapatalk2017 Supra SA
-
11-16-2017, 11:15 PM #19Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
Already own 850 of lead. All in the boat 🤣
Sent from my iPhone using Tapatalk
-
11-16-2017, 11:21 PM #20