Results 1 to 7 of 7
Thread: S Bend tower height adjustment
-
10-01-2017, 05:40 PM #1Junior Member
- Join Date
- Oct 2017
- Posts
- 9
S Bend tower height adjustment
I just purchased a 2016 Mojo with the S Bend tower. I need it to lay down farther to fit in my shop. Can someone please tell me how to do this. I have been searching and can't find anything on this.
-
10-01-2017, 07:11 PM #2Member
- Join Date
- Jul 2012
- Posts
- 57
Interested in this as well. Have a 15 mojo with same tower
-
10-02-2017, 06:34 PM #3
Fold it down, look for a cable running on the under side of the tower between the tower and the base. You should see that cable that goes through to the bottom, on the under side is a big washer that limits how far down it can go. If you were to remove that washer, thus removing the limiter, your tower should go further down.
2018 Supra SA400 aka The Ron Burgandy
2011 Sea-Doo Wake 155
2015 Mojo Surf, sold...2013 Axis A22 Recon Edition, sold...2010 Axis A22, sold...2007 Maxum 1800sr3, sold
-
10-03-2017, 09:42 PM #4Junior Member
- Join Date
- Oct 2017
- Posts
- 9
I got a reply back from Roswell. This is the procedure they sent and it worked perfect. Hope this helps, just be sure to do each side separately so the tower doesn't fall.
IMG_0336.jpg
Edit: Please see the post below for larger image.Last edited by kaneboats; 10-04-2017 at 08:06 AM.
-
10-04-2017, 08:05 AM #5
From the post above, I tried to resize the instructions up a bit:
Tower 1.jpg
Tower2.jpg
Tower3.jpgMy Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
10-04-2017, 08:13 AM #6
I also posted this as a "sticky" in the HOW TO. Great work!
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
10-04-2017, 10:24 AM #7Member
- Join Date
- Jul 2012
- Posts
- 57
awesome. thanks for the info