Quote Originally Posted by timmerz View Post
I'll take pics tomorrow. I installed the thru hulls on the right (starboard) side in almost exactly the same location. pretty easy install. drilled 2 holes from the battery compartment into center hold, then into helm to run the battery harnesses. the wakemakers setup was fantastic. The only hitch I had was tightening the bronze thru hull, spun a little tightening down.
I used the existing drain tubing as overflow with check valves, had to extend to the top of the bags. I used the extra 3/4 tubing and fittings from the fill lines. Kept with the existing 3/4 lines for the center as well. didn't think it was worth pulling floor up.
Thank you very much. 5:00 mentioned to me that he had to order extra hose...but the wakemakers kit has changed a bit since he did it several years ago. Was the hose length sufficient for your XLV?

For the electrical, did you use the existing fuse panel?


Sent from my iPhone using Tapatalk