2014 moomba mondo oz hd tower slotted bolt at base

[Jbh_jr]

The slotted 5/8" threaded bolt/pin at the base of my tower backed itself out and came off somewhere on the highway. I can't find a replacement anywhere. Anybody know where I can find one?

[pvlad]

The slotted 5/8" threaded bolt/pin at the base of my tower backed itself out and came off somewhere on the highway. I can't find a replacement anywhere. Anybody know where I can find one?

I'm missing mine too. Ware you able to find a replacement one?
Pls let me know if you did and where from.
Thanks.

[BrettLee3232]

I hate that damn bolt. I finally put some loctite on it and it stopped backing out 🤷🏼*♂️


Sent from my iPhone using Tapatalk

[Jbh_jr]

I'm missing mine too. Ware you able to find a replacement one?
Pls let me know if you did and where from.
Thanks.

I ended up buying a threaded bolt cutting off the hex head, ground down the threads, leaving about 5/8" of the remaining threads and notching the end so I could use a slotted screw driver to tighten. Took me about 1/2 hour with a hand grinder and bench vise.

[Jbh_jr]

Yeah me too! I noticed the one side of the tower bouncing up and down while towing a wakeboarder. I ended up machining my own bolt and adding loctite to both sides. Problem solved!

[BrettLee3232]

Such a horrible design


Sent from my iPhone using Tapatalk