Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2017
    Location
    Clarksville, TN
    Posts
    39

    Default Cold Start Issue 2005 325 Indmar FI

    Developed a cold start issue.

    Wants to start cold and does but idles too low and dies. I can advance the throttle a tad, and she starts right up. No issues starting once warmed up, starts with a bump of the key. No other running issues, just the first start of the day.

    Cap and rotor button are new. Had that issue a few weeks back, it started missing after running fine, it was arcing in he cap. Cap looked to be original, and the boat had about 475 hours on it at the time.
    2005 Mobius LSV GG3 Package w/ Acme 1433
    325 Indmar MPFI
    Ballast: 750s Rear, 400 Center, 2 spare 260s
    Kenwood KMR-440U
    Wetsounds WS-420
    JL M600/6 on 6 Polk MM6501UMs
    JL HD750.1 on a Kicker L7 10"
    JL HD600.4 on Kicker 6500.2 HLCDs

  2. #2
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    2,145

    Default

    What are the plugs like?


    Sent from my iPhone using Tapatalk
    2017 Moomba Craz

  3. #3
    Join Date
    Feb 2010
    Location
    Hartwell Ga.
    Posts
    127

    Default

    Try cleaning the idle air control. It probably has some carbon build up.
    04 LSV

  4. #4
    Join Date
    Jul 2017
    Location
    Clarksville, TN
    Posts
    39

    Default

    Replaced plugs yesterday, 4 were black, and they were all about .055 gap except for one of the black ones. it was around .030. They looked to be the originals, but I am not sure. They were the iridiums, and I replaced them with MR43LTS gapped at .045. Have to see how sehe starts this weekend.

    Also replace the fuel filter, it didnt look to be too old, but hard to tell. It wasn't clogged could blow thru it with about the same resistance as the new one.
    2005 Mobius LSV GG3 Package w/ Acme 1433
    325 Indmar MPFI
    Ballast: 750s Rear, 400 Center, 2 spare 260s
    Kenwood KMR-440U
    Wetsounds WS-420
    JL M600/6 on 6 Polk MM6501UMs
    JL HD750.1 on a Kicker L7 10"
    JL HD600.4 on Kicker 6500.2 HLCDs

  5. #5
    Join Date
    Sep 2009
    Location
    Tryon NC
    Posts
    160

    Default

    Quote Originally Posted by Mikes View Post
    Try cleaning the idle air control. It probably has some carbon build up.
    Where is that idle air control at? Any pictures

    Sent from my SM-G900V using Tapatalk
    "You spend most of your life, looking for the adult that you are... then you spend the rest of your life looking for the child that you were."
    98 boomerang sold
    04 outback lsv

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •