Results 1 to 5 of 5
-
08-17-2017, 11:03 AM #1
Cold Start Issue 2005 325 Indmar FI
Developed a cold start issue.
Wants to start cold and does but idles too low and dies. I can advance the throttle a tad, and she starts right up. No issues starting once warmed up, starts with a bump of the key. No other running issues, just the first start of the day.
Cap and rotor button are new. Had that issue a few weeks back, it started missing after running fine, it was arcing in he cap. Cap looked to be original, and the boat had about 475 hours on it at the time.2005 Mobius LSV GG3 Package w/ Acme 1433
325 Indmar MPFI
Ballast: 750s Rear, 400 Center, 2 spare 260s
Kenwood KMR-440U
Wetsounds WS-420
JL M600/6 on 6 Polk MM6501UMs
JL HD750.1 on a Kicker L7 10"
JL HD600.4 on Kicker 6500.2 HLCDs
-
08-17-2017, 11:19 AM #2
What are the plugs like?
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
08-17-2017, 11:27 AM #3
Try cleaning the idle air control. It probably has some carbon build up.
04 LSV
-
08-28-2017, 11:15 AM #4
Replaced plugs yesterday, 4 were black, and they were all about .055 gap except for one of the black ones. it was around .030. They looked to be the originals, but I am not sure. They were the iridiums, and I replaced them with MR43LTS gapped at .045. Have to see how sehe starts this weekend.
Also replace the fuel filter, it didnt look to be too old, but hard to tell. It wasn't clogged could blow thru it with about the same resistance as the new one.2005 Mobius LSV GG3 Package w/ Acme 1433
325 Indmar MPFI
Ballast: 750s Rear, 400 Center, 2 spare 260s
Kenwood KMR-440U
Wetsounds WS-420
JL M600/6 on 6 Polk MM6501UMs
JL HD750.1 on a Kicker L7 10"
JL HD600.4 on Kicker 6500.2 HLCDs
-
08-28-2017, 05:02 PM #5