Results 11 to 20 of 23
Thread: 2016 Craz prop help
-
08-14-2017, 02:59 PM #11Senior Member
- Join Date
- Apr 2017
- Location
- Atlanta
- Posts
- 175
Thanks I will give them a call. Interestingly enough on their website they recommend the same ACME props that wake makers does. I will call and ask them to compare the OJ 15x13 with the ACME options.
2016 Craz
-
08-14-2017, 04:20 PM #12Senior Member
- Join Date
- Apr 2017
- Location
- Atlanta
- Posts
- 175
So FYI for all, nettles recommended the 2313 prop.
2016 Craz
-
08-14-2017, 04:31 PM #13
The 2313 would be hammer time. If that prop can't pull you out of the hole with max ballast and full boat, nothing will.
Sent from my SM-G900W8 using Tapatalk2016 Craz.
Enzo bags.
-
08-14-2017, 04:55 PM #14Senior Member
- Join Date
- Apr 2017
- Location
- Atlanta
- Posts
- 175
Little worried it's too much and the 15x13 would be sufficient. Decisions decisions
2016 Craz
-
08-14-2017, 05:13 PM #15
-
08-14-2017, 05:17 PM #16Senior Member
- Join Date
- Apr 2017
- Location
- Atlanta
- Posts
- 175
Yea they said save the box and I can switch out. Only concern is wakeboarding rpms. I don't really know what "too high" is though for sustained wakeboarding Rpms. I don't really sac the boat out wakeboarding, just surfing.I was told to expect to lose about 5mph top speed which I am ok with as I can get to 40mph currently with no issues. Customer service was top notch also for anyone looking for a place to buy!
2016 Craz
-
08-14-2017, 06:30 PM #17
There is a 15 x 12.5....split the difference
Sent from my SM-G900W8 using Tapatalk2016 Craz.
Enzo bags.
-
08-14-2017, 06:57 PM #18Senior Member
- Join Date
- Apr 2017
- Location
- Atlanta
- Posts
- 175
So it appears the cup is .075 on the 12.5 where it's .150 on the 12. How's that going to affect things?
Thanks for everyone's help so far!2016 Craz
-
08-14-2017, 07:39 PM #19Senior Member
- Join Date
- Feb 2016
- Posts
- 158
I'm running a acme 2419. With the same weight as you. Everything full it pulls me up like nothing, but that's at surf speed. 3k at surf speed. It you can wait 26 hours I'll tell you what it's like at wakeboard speed as I don't remember.
Sent from my SM-G935V using Tapatalk
-
08-14-2017, 07:44 PM #20Senior Member
- Join Date
- Feb 2016
- Posts
- 158
I do remember the first time taking it out. Running the stock prop one day and the 2419 the next, it scared me at first. Slowly creeped out until i got out of no wake zone, then hammered down. I immediately pull back on the throttle, it felt like it was flipping over backwards. After that it's been a fun prop.
Sent from my SM-G935V using Tapatalk