Results 1 to 4 of 4
Thread: Rad-a-cage tower thickness?
-
08-23-2006, 02:46 PM #1Member
- Join Date
- Jul 2005
- Posts
- 55
Rad-a-cage tower thickness?
I have seen varying sizes from 1 1/2 to 1 7/8 inches on the rad-a-cage thickness. Which one is it? I'm having trouble getting a tower mirror arm to attach.
Thanks,
-
08-23-2006, 03:43 PM #2
Replying to Topic 'Rad-a-cage tower thickness?'
I believe they are 1-5/8".
I think Monster Tower makes a mirror arm that will work.Richard
2001 Mobius
-
08-23-2006, 04:25 PM #3Senior Member
- Join Date
- Mar 2004
- Location
- Martinsville,Indiana
- Posts
- 213
Replying to Topic 'Rad-a-cage tower thickness?'
It is 1 5/8.I bought mine from Airboom and it works great.2004 Mobius LSV.
http://www.airboom.com/shop/index.ht...amp;lang=en-us
John
-
08-23-2006, 10:08 PM #4
Replying to Topic 'Rad-a-cage tower thickness?'
1 5/8" for the Rad a Cage tower. Monster tower does have an arm that will fit BUT only with inserts to make up for the clamp having 2.5" inside diameter. This fits their tower and the inserts are for all sizes so no matter what tower you have you get package of inserts. I have the the Monster mirror arm it works real well and does not move at all the thing that sold me on it was the quick disconnect so when I fold the tower down it is not in the way. Just my $0.02
ScottShare The Water
2006 Outback V
Similar Threads
-
Rad-A-Cage Tower Removal
By Dano in forum Service & RepairReplies: 2Last Post: 06-19-2007, 08:11 AM -
Thickness of LSV06 tower tubing
By Roachman in forum General ChatReplies: 1Last Post: 10-15-2006, 07:47 PM -
rada cage tower
By Zihuatanejo in forum General ChatReplies: 9Last Post: 12-02-2004, 06:06 PM -
Rad-a cage tower
By in forum General ChatReplies: 2Last Post: 03-15-2004, 01:01 AM -
Lowering the rad a cage tower
By mdrsdr in forum General ChatReplies: 1Last Post: 05-30-2003, 08:35 AM