Quote Originally Posted by htfit View Post
This may sound like a weird question, but at what point is the inclinometer calibration taken off of? In other words, I installed some manual bubble inclinometers and based 0 degrees off the floor of the boat. I adjusted the pitch of the boat with the trailer jack until the floor was perfectly level and set my inclinometer to 0 based on that. But it was 2.5 degrees off from what autowake was telling me so I need to either recalibrate autowake or the pitch is taken off a different point other than the floor of the boat.

Just trying to figure out if autowake needs to be recalibrated or if my measurements are way off. I would really like to start utilizing autowake.

Thank you!
This might help you.


https://youtu.be/jcwD-neqFGc


Sent from my iPhone using Tapatalk