Page 47 of 47 FirstFirst ... 37454647
Results 461 to 470 of 470
  1. #461
    Join Date
    Sep 2011
    Location
    Christina Lake
    Posts
    168

    Default

    Hey Goose
    I have automaker pretty dialled for surfing and it works well for wake boarding to, but my main concern is when I switch from my wakeboard profile to my wifes wakeboard profile. I like it the wake steeper and she prefers it more mellow. So why does it just fill the nose more instead of emptying the rear tanks? I go and instead of emptying ballast, it adds ballast.
    Her amplitude is set at 35 7.5 pitch and 0 roll wake plate 46, and mine is at 65 amplitude 7.5 pitch and wake plate at 15.

    thanks
    2018 Supra SL
    2013 Nautique 210
    2011 outback v
    1992 Sunbird

  2. #462
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    1,888

    Default

    Hey guys, here's the video I made that shows you how to use Autowake and change setting etc:
    2017 Moomba Craz

  3. #463
    Join Date
    Aug 2011
    Posts
    2,347

    Default

    Quote Originally Posted by Stazi View Post
    Hey guys, here's the video I made that shows you how to use Autowake and change setting etc:

    Great minds think alike, I put together a power point video but was slacking on posting it..

    Moomba AutoWake - How to get the best Wave 2019 - PowerPoint Presentation

    Moomba AutoWake - How to get the best Wave 2019 - YouTube
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  4. #464
    Join Date
    Jul 2017
    Location
    Columbus, GA
    Posts
    79

    Default

    Quote Originally Posted by parrothd View Post
    Great minds think alike, I put together a power point video but was slacking on posting it..

    Moomba AutoWake - How to get the best Wave 2019 - PowerPoint Presentation

    Moomba AutoWake - How to get the best Wave 2019 - YouTube
    Good video, but why does your port plate show at 29 when you have the switch turned surf left? In fact, mine can only adjust in increments of 5...
    17' Craz

  5. #465
    Join Date
    Aug 2011
    Posts
    2,347

    Default

    Quote Originally Posted by jared24 View Post
    Good video, but why does your port plate show at 29 when you have the switch turned surf left? In fact, mine can only adjust in increments of 5...
    Hahaha.. I didn't think anyone would notice that. It gets stuck every now and then and have to cycle side to side to clear it. Didn't notice it until editing..
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  6. #466
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,006

    Default

    Quote Originally Posted by Stazi View Post
    Hey guys, here's the video I made that shows you how to use Autowake and change setting etc:
    You're not originally from Michigan are you? You sound like you're from down under!
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420.

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  7. #467
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    1,888

    Default

    Quote Originally Posted by rdlangston13 View Post
    You're not originally from Michigan are you? You sound like you're from down under!
    You are correct!


    Sent from my iPad using Tapatalk
    2017 Moomba Craz

  8. #468
    Join Date
    May 2018
    Posts
    1,399

    Default

    Autowake is AWESOME, that is all.


    Sent from my iPhone using Tapatalk
    2018 Supra SA 400
    Michigan

  9. #469
    Join Date
    Sep 2017
    Location
    North Carolina
    Posts
    18

    Default

    So - I noticed on the 2019 models that you can store autowake settings per setting (Wake, Port Surf, Stbd Surf). But on the upgraded firmware I have on my 2017, it doesn't include the amplitude setting (just roll and pitch).

    While I don't have the amplitude sensor, I do find that the amplitude setting controls the ballast fill levels when in Wake setting. When I'm kneeboarding, I don't want full ballast. But I do when surfing. Presently, I have to remember to adjust that setting when I switch between wake and port/stbd surfing or else it dump ballast (low amplitude) or adds too much (high amplitude).

    That seems to me an easy setting to have remembered in the autowake settings so that it automatically adjusts based on which mode you are in. Is there a newer firmware that we can get that might have that setting? Any thoughts to adding it to those of us with "older" boats?

    chezdude
    Last edited by chezdude; 09-23-2019 at 03:50 PM. Reason: clarify content
    2017 Moomba Craz Surf Edition
    High altitude prop
    1140 lb WakeMakers Universal Fit rear ballast upgrade
    Autowake 2.0 firmware upgrade (20171121 version)
    2013 SeaDoo GTI135SE with ski mode
    1984 SeaRay 210 CC - traded

  10. #470
    Join Date
    Nov 2019
    Posts
    1

    Default

    Hello all I am new to the forum , I am in SE Wisconsin and just bought my first boat a 2019 Helix with autowake and 2.0 surf system. This video was very informative, thanks for posting. I will be putting my boat in late April , I canít wait. The dealer is going to go out with me the first couple times to help me learn all the boat has to offer but Iím sure I will still have a bunch of questions. I am really only interested in surfing , I look forward to dialing in the best set up.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •