Page 45 of 46 FirstFirst ... 3543444546 LastLast
Results 441 to 450 of 459
  1. #441
    Join Date
    Aug 2011
    Posts
    2,319

    Default

    9.8 is my speed too, the actual numbers don't matter, just remember what works for your boat and riding style. No 2 boats will have the same setup or numbers exactly.
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  2. #442

    Default

    I bought a 2018 MOJO Pro. The sacks in the rear of the boat do not fill the rear. I am not getting the full potential of the wave I want. What brand do you recommend for the 2018 MOJO PRO

  3. #443
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    764

    Default

    Quote Originally Posted by brentonfield View Post
    I bought a 2018 MOJO Pro. The sacks in the rear of the boat do not fill the rear. I am not getting the full potential of the wave I want. What brand do you recommend for the 2018 MOJO PRO
    I have the Enzo sacs in my 2017 mojo pro and they near fill the rear lockers. Iím really happy with them. There is a touch of room on top for a few life jackets when full.
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  4. #444
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    764

    Default

    Quote Originally Posted by moombahighrider View Post
    I have the Enzo sacs in my 2017 mojo pro and they near fill the rear lockers. Iím really happy with them. There is a touch of room on top for a few life jackets when full.
    Having said that, I am finding that I now donít have enough wait in the front. I am adding 500lbs of lead in the bow this summer to see how that Ďshapesí out...
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  5. #445
    Join Date
    Jun 2016
    Posts
    194

    Default

    Sorry if I missed this in the 45+ pages. but what the procedure to re calibrate autowake?

    My boat (19 MAX ) was "Tinkered" with by my salesman without me present. (In an effort to help) However, I don't feel I am getting the best wake from a 22' boat. Can I surf it? yes, but the "Pocket" seems small, and it is nothing to write home about compared to my neighbors beater supreme v232. I also just rode a Centurion FI 21. I wont bore you, but that stock boat throws a friggin TSUNAMI out the back. Hence there is room for improvement with my Max because it not that much better than my '15 LSV was.

    NOTE: I have around 800lbs per side in Midship lockers.

    Cheat Sheet: I had a Supra owner show me a cheat sheet put out by Supra on what the settings should be with different amounts a people ect. Does Moomba have something Similar?

    Rant: IMHO Moomba has A LOT of opportunity for improvement here in regards to Teaching us how to use Autowake. I want to use my boat. I DO NOT want a 45 page research project on the subject. It seems there is a lot show casing in regards to sales, but little in way to usage per boat model.
    2019 MAX On Order (4-2-19 SD)
    2015 Mobius LSV Surf Edition (SOLD)
    2001 Supra Sunsport SSV- SOLD
    2017 Ram 2500 Crew Cummins 6.7L

  6. #446
    Join Date
    May 2019
    Location
    WA
    Posts
    77

    Default

    Quote Originally Posted by flienlow View Post
    Sorry if I missed this in the 45+ pages. but what the procedure to re calibrate autowake?

    My boat (19 MAX ) was "Tinkered" with by my salesman without me present. (In an effort to help) However, I don't feel I am getting the best wake from a 22' boat. Can I surf it? yes, but the "Pocket" seems small, and it is nothing to write home about compared to my neighbors beater supreme v232. I also just rode a Centurion FI 21. I wont bore you, but that stock boat throws a friggin TSUNAMI out the back. Hence there is room for improvement with my Max because it not that much better than my '15 LSV was.

    NOTE: I have around 800lbs per side in Midship lockers.

    Cheat Sheet: I had a Supra owner show me a cheat sheet put out by Supra on what the settings should be with different amounts a people ect. Does Moomba have something Similar?

    Rant: IMHO Moomba has A LOT of opportunity for improvement here in regards to Teaching us how to use Autowake. I want to use my boat. I DO NOT want a 45 page research project on the subject. It seems there is a lot show casing in regards to sales, but little in way to usage per boat model.
    I'd go on the FB page. But most folks will tell you to read this entire thread. Once you do youll understand auto wake. But if you want just numbers go to the FB page and search Max auto wake.
    2019 - Makai on order
    2018 Yamaha AR195 SOLD

  7. #447
    Join Date
    Sep 2017
    Location
    North Carolina
    Posts
    12

    Default

    Goose,

    Did you ever compile all your hints and tips into a single document that you would be willing to share with the forum (and public)? I've been reading through this forum for 2 years now and learning something new each time that has made it better, but it would be nice to have it all in a single doc to share with the wife.

    Thanks,
    heath
    2017 Moomba Craz Surf Edition
    High altitude prop
    1140 lb WakeMakers Universal Fit rear ballast upgrade
    Autowake 2.0 firmware upgrade (20171121 version)
    2013 SeaDoo GTI135SE with ski mode
    1984 SeaRay 210 CC - traded

  8. #448
    Join Date
    Jul 2017
    Location
    Columbus, GA
    Posts
    77

    Default

    Quote Originally Posted by goose View Post
    Mattsask,

    What I used to do before AutoLaunch was leave the surf system down. Not sure if everyone knows this, but if you leave the flow plates down, they automatically come up at 15mph. It is not quite the same as AutoLaunch, but there were times when it got me on plane whereas with no flow plate help, I couldn't get on plane. Unfortunately in 2016 there was no way to deploy both plates at same time, but this should help.
    When you say leave the surf system down, you're referring to having the surf switch to the left or right correct? Therefore keeping just one flow plate down till reaching 15 mph. Or is there a way to have both flow plates down at the same time other than using autolaunch?
    17' Craz

  9. #449
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    1,762

    Default

    As far as I know you cannot get all 3 plates to deploy on launch unless you have Autowake, and have it on in the wakeboard mode (ie Autowake On with no surf side selected).


    Sent from my iPhone using Tapatalk
    2017 Moomba Craz

  10. #450
    Join Date
    Jul 2017
    Location
    Columbus, GA
    Posts
    77

    Default

    Quote Originally Posted by Stazi View Post
    As far as I know you cannot get all 3 plates to deploy on launch unless you have Autowake, and have it on in the wakeboard mode (ie Autowake On with no surf side selected).


    Sent from my iPhone using Tapatalk
    Was thinking the same. Just wanted to make sure I wasn't missing anything when he said leave the surf system down...
    17' Craz

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •