16 craz water leak

[BrokeGuy]

So I've been chasing a water leak my craz for a few weeks. I finally found it the prop shaft seal is leaking. I've read that they could leak some. However up until a few weeks again the bilge would never run, we hardly had any water when pull the plug. But now the bilge runs almost every time we come off throttle and water will be 2 or 3 inches up the center plug. Has anyone run into this issue on a craz. I'm only at 125 hours

Sent from my SM-G935V using Tapatalk

[mattsask]

I have the exact same issue. I think it should be more like a drop every ten seconds.

Sent from my SM-G900W8 using Tapatalk

[BrokeGuy]

I have the exact same issue. I think it should be more like a drop every ten seconds.

Sent from my SM-G900W8 using Tapatalk

Mine is a steady stream. Seems worse weighted

Sent from my SM-G935V using Tapatalk

[hawgtitan]

I had same problem last year and it had to do with ballast. The dealer fixed something on rear bags and then I glued in fill fittings on new 1100's and no water this year.


Sent from my iPhone using Tapatalk