Results 1 to 5 of 5
-
07-21-2017, 03:56 PM #1
Junior Member
- Join Date
- Jul 2017
- Posts
- 2
HELP NEEDED: Wakeboard Tower Speakers
I currently have 2, 750 watt 4 ohm power acoustik speakers, but what I need help with is knowing what kind of amp will match up with the speakers. Also, I know there are different ways to wire speakers so any advice on the best way to do that is also greatly appreciated.
-
07-21-2017, 04:31 PM #2
Junior Member
- Join Date
- Jun 2009
- Posts
- 3
750W Peak?
I would personally throw in a PPI 900.4, bridged down to 4Ωx2, ~450W.
My guess that leaves a lot of headroom for the current setup, and for upgrades down the road.
Been more than pleased with the 900.4 on my REV10s
-
07-21-2017, 04:39 PM #3
Senior Member
- Join Date
- Oct 2010
- Location
- Lake Wylie NC Area
- Posts
- 2,467
Do you have a model number of those speakers? 750W sounds like peak for both combines, which would equate to about 175W rms for each pod.
-
07-21-2017, 05:22 PM #4
Junior Member
- Join Date
- Jul 2017
- Posts
- 2
They are power acoustik MWT-80T and they are 750 watts max, 375 watts RMS each.
Last edited by tylerwilson143; 07-21-2017 at 05:29 PM.
-
07-21-2017, 08:08 PM #5
Senior Member
- Join Date
- Oct 2010
- Location
- Lake Wylie NC Area
- Posts
- 2,467
Power Handling:
Originally Posted by tylerwilson143
Peak: 750 watts per pair / 375 watts each
RMS: 375 watts per pair / 187 watts each
https://www.sonicelectronix.com/item...k-MWT-80T.html
My amp choice for wattage v's $$$ would be the kicker KXMA400.4 @ 200W rms x 2 @ 4 ohm http://www.kicker.com/kxma4004-4-cha...rine-amplifierLast edited by MLA; 07-21-2017 at 08:10 PM.
Reply With Quote
