![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
I have a friend with a 2013 LSV . It has a two point tower that folds forward. There are two black plastic knobs to loosen then it will fold. One of the knobs locked up in the thread insert in the tower base and came out with the knob. I need the knob and the insert to fix it . Has anybody had this happen ? Does anybody know who makes the tower ?
No idea, but following to find out. My tower was close to doing this, I had to tap clean the threads when I finally got the knob out. Hoping to not have to do it again...
Last edited by JoelFett; 07-21-2017 at 07:48 AM.
2015 Mobius LSV Surf Edition
6.2L Raptor power
1100's and Flow
Acme 1847
2003 Wakesetter xTi - sold
Does Roswell make the towers and racks for Moomba and Supra?
2017 Centurion Ri237
2013 Supra SA450 - Sold
2006 Mobius LSV - Sold
2004 Stingray 190LS - Sold
2016 Nissan Titan XD - Tow Rig
Roswell makes the new towers, not sure how far back they go.
2017 Mojo Surf Edition
2017 F-150 XLT Tow Vehicle
-----------Other Toys-----------
2007 Honda AquaTrax F-12X
1994 Toyota Supra Turbo
2013-2015 LSV uses the same tower, if I'm not mistaken
Sent from my SM-G930V using Tapatalk
2015 Mobius LSV Surf Edition
6.2L Raptor power
1100's and Flow
Acme 1847
2003 Wakesetter xTi - sold
Well Atlanta Marine was as helpful as always Cindy said she didn't even know who makes the tower but a minute later she told the counter man the name of who to contact at Xtream towers. They just wanted the owner to bring the boat. Its hard to believe how far they have gone down since Cindy took over. I called White Lake Marine in North Carolina what a difference they were more than willing to track down the parts for me.
The Saga continues . White Lake never contacted me back even after three more messages were left . I put it back in the hands of the boat owner. He went back to Atlanta Marine. Now Cindy knows all about this issue there are four more boats with the same problem she is getting parts for all of them. So why the deception? Why tell me they never heard of this problem only a day earlier? I never asked for or expected any warranty or consideration . I just wanted to BUY the parts. This is not my first dealing with Cindy I own three Supras. Too bad the closest dealer to me is the last place I would ever go for parts or anything else. For all you guys with the two point Extreme towers you have to put anti seize on the threads of the lock down knobs or they may seize up. Its not written anywhere and I doubt the dealer ever told the customer about it.
I feel your pain... I have nothing constructive to add other than when I was buying my current boat, it was on consignment at White Lake. Overall they came through but it was a heck of a process to get communication. They would never call back when they said they would - both sales and parts - and other than service records, I found myself much more knowledgeable of the boat and what it needed than they did. The owner supplying parts was part of the sale and of course he did it though them, but it was painful during the whole ordeal. Unfortunately, I can't say I would recommend them.
Have you thought about drilling out the threads and inserting a heli-coil? That would be a permanent solution and eliminate the galling of threads going forward. I believe you can even get stainless inserts. To get the old insert off, I would soak it in PB Blaster overnight and then use heat if necessary with vice grips... Possibly will ruin the knob, BUT in a pinch you could put a standard fastener in place so you can get back out on the water while you hunt for the real knob. Also, have you tried McMasterCarr for knobs?
2008 OBV
325 EFI with closed cooling
Gravity III with 750's in the rear, 400 stock floor, 750 IBS
Servo valve ballast upgrade
Wetsounds Rev10
JL Amps, WS420BT
2000 Outback LS <-- Sold!!!
310 Carb Direct Drive
800# Rear Locker
750# IBS (should have kept this for the OBV)
Dual Batteries with 2 Bank Charger System
Kenwood Head with Remotes
Too many hours restoring exterior from prior negligence to count!
I had the same exact issue happen late last summer and it was a nightmare. Brought it to the dealer and for repair, they said they could not replace just the insert screw that came out (it would be unsafe) and that I needed to buy a new base for the tower at a cost of $600. Took 3 months to get the new base part. Then they couldn't get the bolt/screw out to remove the tower from the base. Then they decided it was ok to just replace the insert part and not the whole base. It was a complete joke to deal with. Hope you have better luck.
20160904_224440962_iOS.jpg20160904_224459995_iOS.jpg
2023 Craz
2013 LSV
The insert came out of the tower base and is seized to the threads on the knob . This is a quick no brainier repair if I could get a dealer to order the parts. This is a common problem that could be avoided by putting anti-seize on the threads . Too bad nobody told the boat owners that its also not in the manual .