Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30
  1. #21
    Join Date
    Apr 2013
    Location
    Richmond, VA
    Posts
    123

    Default

    I installed the new sea strainer last year and it is absolutely worth the $100. Very easy to run off the hose now.
    I did have to cut off part of my intake hose to make it fit but that was fairly easy to do with a hacksaw.
    2017 Axis T23
    2014 Supra SC350 Sold
    2012 Outback V - Sold

  2. #22
    Join Date
    Apr 2017
    Location
    Columbus, OH
    Posts
    20

    Default

    Looking for directions on what this would take to install on CAT 340, the indmar one with the hose attachment. Thanks
    2009 Supra Launch 22SSV
    340 Cat

  3. #23
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    1,080

    Default

    Is this the one?

    http://www.mastercraft.com/teamtalk/...ad.php?t=72593

    Sent from my P00I using Tapatalk
    2007 Supra SSV 22'

  4. #24
    Join Date
    May 2013
    Location
    Fairfax, VA :(
    Posts
    916

    Default

    Yup that's the one. It was a breeze flushing and adding antifreeze this year. I had to empty the strainer once and it was no problem at all. It wasn't the mess I thought it would be. Glad I did this upgrade for sure. Peace of mind having a ball valve on there now also.
    2007 XLV Gravity Games
    Full Wake Makers upgraded ballast and pumps
    1,100 in each rear locker
    1,180 in front
    OJ 1435 prop, 325 EFI Indmar Assult.
    Fresh Air Exhaust
    SuckG8
    Bunch of other crap

  5. #25
    Join Date
    Sep 2018
    Posts
    13

    Default

    I hate to bring up an old thread but I’m looking to add the sea strainer also. Given the boat is in storage, is anyone able to confirm that the water hose is 1 1/4”?

    2018 Mondo

  6. #26
    Join Date
    Oct 2016
    Location
    Tims Ford Lake TN
    Posts
    215

    Default

    Not sure which hose you are referring to but the sea strainer was basically plug and play on my 16 Mojo. Just cut the hose between the through hull valve and the v-drive inlet and install the strainer. Might have to remove a few inches of hose. The size on the strainer is matched the hoses used from factory on the indmar raptors. The threaded garden hose inlet is standard as well to all "normal" water hoses.
    2016 Mojo Surf
    Raptor 400
    1100 rear bags
    Exile amps/tower - Kicker in-boat
    FAE

  7. #27
    Join Date
    Sep 2018
    Posts
    13

    Default

    Yes the hose connecting to the v drive inlet. But they make the strainer in 1” and 1 1/4” size. I believe that inlet is 1 1/4” hose. Are you able to confirm?
    2018 Mondo

  8. #28
    Join Date
    Oct 2016
    Location
    Tims Ford Lake TN
    Posts
    215

    Default

    Yes, in the boat for some garage boating right now. Its 1.25. Good luck!
    2016 Mojo Surf
    Raptor 400
    1100 rear bags
    Exile amps/tower - Kicker in-boat
    FAE

  9. #29
    Join Date
    Sep 2018
    Posts
    13

    Default

    Perfect. Thank you!
    2018 Mondo

  10. #30
    Join Date
    Feb 2019
    Posts
    9

    Default

    The guys at O'Reilly's let me walk back in the hose section to pick this out. It's a pretty good fit & angle for the XLV. IMG_0219[1].jpgIt's a Gates
    '06 Gravity XLV
    Wetsounds stuff

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •