Results 21 to 30 of 30
Thread: Installed Indmar sea strainer
-
08-17-2017, 08:39 AM #21Senior Member
- Join Date
- Apr 2013
- Location
- Richmond, VA
- Posts
- 123
I installed the new sea strainer last year and it is absolutely worth the $100. Very easy to run off the hose now.
I did have to cut off part of my intake hose to make it fit but that was fairly easy to do with a hacksaw.2017 Axis T23
2014 Supra SC350 Sold
2012 Outback V - Sold
-
01-26-2018, 10:43 AM #22Junior Member
- Join Date
- Apr 2017
- Location
- Columbus, OH
- Posts
- 21
Looking for directions on what this would take to install on CAT 340, the indmar one with the hose attachment. Thanks
2018 SR450
**Previous**2009 Supra Launch 22SSV
-
01-27-2018, 03:35 PM #23
Is this the one?
http://www.mastercraft.com/teamtalk/...ad.php?t=72593
Sent from my P00I using Tapatalk2018 Supra SL400
-
01-31-2018, 12:28 PM #24
Yup that's the one. It was a breeze flushing and adding antifreeze this year. I had to empty the strainer once and it was no problem at all. It wasn't the mess I thought it would be. Glad I did this upgrade for sure. Peace of mind having a ball valve on there now also.
2007 XLV Gravity Games
Full Wake Makers upgraded ballast and pumps
1,100 in each rear locker
1,180 in front
OJ 1435 prop, 325 EFI Indmar Assult.
Fresh Air Exhaust
SuckG8
Bunch of other crap
-
01-24-2019, 09:02 PM #25Member
- Join Date
- Sep 2018
- Posts
- 43
I hate to bring up an old thread but I’m looking to add the sea strainer also. Given the boat is in storage, is anyone able to confirm that the water hose is 1 1/4”?
2018 Mondo
-
01-25-2019, 12:55 PM #26Senior Member
- Join Date
- Oct 2016
- Location
- Tims Ford Lake TN
- Posts
- 453
Not sure which hose you are referring to but the sea strainer was basically plug and play on my 16 Mojo. Just cut the hose between the through hull valve and the v-drive inlet and install the strainer. Might have to remove a few inches of hose. The size on the strainer is matched the hoses used from factory on the indmar raptors. The threaded garden hose inlet is standard as well to all "normal" water hoses.
2016 Mojo Surf
Raptor 400
1100 rear bags / 500 IBS / 600 LeadWake
Exile amps/tower - Kicker in-boat
FAE
-
01-25-2019, 06:34 PM #27Member
- Join Date
- Sep 2018
- Posts
- 43
Yes the hose connecting to the v drive inlet. But they make the strainer in 1” and 1 1/4” size. I believe that inlet is 1 1/4” hose. Are you able to confirm?
2018 Mondo
-
01-26-2019, 04:01 PM #28Senior Member
- Join Date
- Oct 2016
- Location
- Tims Ford Lake TN
- Posts
- 453
Yes, in the boat for some garage boating right now. It’s 1.25”. Good luck!
2016 Mojo Surf
Raptor 400
1100 rear bags / 500 IBS / 600 LeadWake
Exile amps/tower - Kicker in-boat
FAE
-
01-26-2019, 07:54 PM #29Member
- Join Date
- Sep 2018
- Posts
- 43
Perfect. Thank you!
2018 Mondo
-
04-15-2019, 06:44 PM #30
The guys at O'Reilly's let me walk back in the hose section to pick this out. It's a pretty good fit & angle for the XLV. IMG_0219[1].jpgIt's a Gates