Quote Originally Posted by moombahighrider View Post
Matt, with the g6 system, does each pump have a dedicated thru-hull fitting or are you splitting the line from 1 thru-hull to each of the 2 pumps?
Good question. With the 6 pump system, we are actually only using 3 thru hulls and splitting the line to each pump. In our testing, we found with the impellor pumps, they will pull the water they need and while it may not be 100% efficient, it was more efficient and more feasible than to install 6 thru hulls in the bottom of the boat. Not sure if you have looked, but we are running out of real estate in the bilge area. I have a feeling you might be asking this because you want to do this yourself for your 2017 Pro?? If that is the case, then yes, anything is possible, but we did also relocate both front pumps to be mounted on a panel in front of the front ballast tank. We had to slightly modify the front ballast tank to make room. Obviously we also had to change wiring and we actually power the 6 pumps through 3 different relay based boxes. Again, anything is possible and I have seen other people do similar modifications to their current boats so if that was the reason for your question, hopefully that answers some of the technical details.