Results 21 to 23 of 23
Thread: 2005 LSV Surf Setup
-
07-31-2017, 10:24 AM #21
Member
- Join Date
- Jul 2017
- Location
- Clarksville, TN
- Posts
- 39
First picture was before with 750 port and 260 center full without suck gate. 2 people in the boat. Washed out once I got in the water.
Second picture is 750 port full, 750 stb about half to 2/3, and 400 center full and with suck gate. 3 extra people on board. Got even better when the wifey, 125lbs, showed up and I put her and my daughter in the front.
Went ropeless 10+ minutes numerous times without a problem. Weight and suck gate are key.
Sent from my SM-G930V using TapatalkLast edited by JamesEvans; 07-31-2017 at 10:27 AM.
2005 Mobius LSV GG3 Package w/ Acme 1433
325 Indmar MPFI
Ballast: 750s Rear, 400 Center, 2 spare 260s
Kenwood KMR-440U
Wetsounds WS-420
JL M600/6 on 6 Polk MM6501UMs
JL HD750.1 on a Kicker L7 10"
JL HD600.4 on Kicker 6500.2 HLCDs
-
07-31-2017, 10:42 AM #22
Super Moderator
- Join Date
- Jan 2008
- Location
- Tallahassee, FL
- Posts
- 14,071
Looks like you are getting it dialed in. Where are you running the wakeplate? With the gate, I run about half way up. Without it I would have to run it all the way up most of the time.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
07-31-2017, 11:02 AM #23
Member
- Join Date
- Jul 2017
- Location
- Clarksville, TN
- Posts
- 39
Mostly down. Anything up and it washes out.
Originally Posted by kaneboats
Sent from my SM-G930V using Tapatalk2005 Mobius LSV GG3 Package w/ Acme 1433
325 Indmar MPFI
Ballast: 750s Rear, 400 Center, 2 spare 260s
Kenwood KMR-440U
Wetsounds WS-420
JL M600/6 on 6 Polk MM6501UMs
JL HD750.1 on a Kicker L7 10"
JL HD600.4 on Kicker 6500.2 HLCDs
Reply With Quote