Results 1 to 8 of 8
Thread: Is it ok to mount my amp here?
-
07-06-2017, 01:14 AM #1
Is it ok to mount my amp here?
Got a 08 mobius and I have no room to mount my new amp where the other two are. So I was wondering if it is alright to mount the amp on the wall that the air intake tube coming from underneath the port side windscreen. I couldn't get attachments to work so I have a photobucket link. Thanks for reading
2008 Moomba Mobius LSV.
325 ASSAULT
-
07-06-2017, 07:52 AM #2
Yes, just don't use massively long screws that will pass through that and into the outer hull.
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
07-06-2017, 09:24 AM #3
Hey Dallas,
Pull the vent flange and check the thickness of the fiberglass. Those columns can be very thin glass and four #8 screws holding a heavy object could be iffy....so the size/weight of the amplifier might be the determining factor. You could always use a carpeted amp panel that is glued in place if you don't trust screw-mounting.
-
07-06-2017, 09:53 AM #4
I used that exact spot to mount 2 - JL MHD amps. worked Great!!
100_9038.jpg
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
-
07-06-2017, 01:28 PM #5Senior Member
- Join Date
- May 2013
- Posts
- 253
I cut the carpet from mine and mounted a sheet of hdpe on it with screws and adhesive I creasing the surface area to mount my two larger amps on it. Keeps them off the floor, dry and in the air.
-
07-07-2017, 10:27 AM #6Member
- Join Date
- Jul 2015
- Posts
- 80
Yes you can do that...
2018 Supra SL550
2017 Supra SE450
-
07-07-2017, 11:50 AM #7
Btw, if ever needed, that is a great location to elevate the amplifier a bit and install a flush-mount fan directly underneath. The amplifier chassis would act a like a natural shroud, and you are creating dual air exchanges, one, around the amplifier chassis, and two, through the port compartment.
-
07-07-2017, 08:53 PM #8Member
- Join Date
- Jul 2015
- Posts
- 80
David.... that's funny right there...
2018 Supra SL550
2017 Supra SE450