Results 11 to 20 of 20
-
06-23-2017, 11:00 PM #11
My top ones pop out too. Gotta glue them all in.
Sent from my SM-G930V using Tapatalk2015 Mobius LSV Surf Edition
6.2L Raptor power
1100's and Flow
Acme 1847
2003 Wakesetter xTi - sold
-
06-23-2017, 11:08 PM #12
-
06-24-2017, 12:52 AM #13Senior Member
- Join Date
- Jul 2016
- Posts
- 116
The pic looks like just a plug in bottom. You will put the fly high quick connect fitting there that the connection on end of fill/drain hose connects to. The overflow on top is on the back end also and you put the air release on top, front hole.
Sent from my iPhone using Tapatalk2016 Moomba Craz
2014 Chaparral H2O 21 Sport
1997 Sea Ray 175 Sport
-
06-24-2017, 12:55 AM #14Senior Member
- Join Date
- Jul 2016
- Posts
- 116
I used PVC cement. Worked great for me.
Sent from my iPhone using Tapatalk2016 Moomba Craz
2014 Chaparral H2O 21 Sport
1997 Sea Ray 175 Sport
-
06-24-2017, 01:42 AM #15
What he said
2015 Mobius LSV Surf Edition
6.2L Raptor power
1100's and Flow
Acme 1847
2003 Wakesetter xTi - sold
-
06-24-2017, 02:38 PM #16Member
- Join Date
- Apr 2017
- Posts
- 58
-
06-25-2017, 11:16 PM #17
Use teflon tape on the threads Easypeasy
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
06-26-2017, 08:57 AM #18Senior Member
- Join Date
- May 2017
- Posts
- 171
-
06-27-2017, 04:34 PM #19Senior Member
- Join Date
- Oct 2016
- Location
- Tims Ford Lake TN
- Posts
- 453
You shouldn't need hose extensions on a 2016 Mojo....at least I didn't. Get the quick connect fittings from WM. The bags will come with enough plugs for the other holes. I didn't glue as folks have mentioned, no issues so far but I might rethink that in the off season. Are most folks running something other than a plug for the front top fitting location? Since the back top is the overflow line I didn't think there was a need for a check valve vent fitting (for "burping").
2016 Mojo Surf
Raptor 400
1100 rear bags / 500 IBS / 600 LeadWake
Exile amps/tower - Kicker in-boat
FAE
-
07-06-2017, 07:13 PM #20Junior Member
- Join Date
- Jun 2017
- Location
- Lake Belton, TX
- Posts
- 3
How did the 24x24x50 sac fit in the sac slot? I'm in the same boat as you are and upgrading my sacs as well. I saw the ones you ordered. I'm a bit concerned with the length since the sac compartment is only around 45-46" long? Are your sacs having to run under the header of the sac compartment pushing up to the bow and pinched? do they fill all the way?