Results 21 to 26 of 26
Thread: Enzo's vs. Lead
-
07-19-2017, 12:25 PM #21
Following this thread also...
Is anyone in favor of the Enzos over adding lead? I see everyone giving opinions on where and how to distribute the lead but not much in favor of bag upgrades. Is everyone basically in agreement that lead is the way to go?
Thanks in advance!Garrett
2017 Moomba Mojo
Flow 2.0 Surf MAX Package
Black/Brittany Blue Metal Flake
w/ Striker Graphics
-
07-19-2017, 12:27 PM #22David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
07-19-2017, 12:28 PM #23
I run a combo of steel and enzo's. The water is super shallow in front of our cottage, so I'm only able to use steel/lead in the nose where it doesn't effect my draft.
Sent from my SM-G900W8 using Tapatalk2016 Craz.
Enzo bags.
-
07-19-2017, 01:42 PM #24Garrett
2017 Moomba Mojo
Flow 2.0 Surf MAX Package
Black/Brittany Blue Metal Flake
w/ Striker Graphics
-
07-19-2017, 02:14 PM #25
I have 500lb of lead along with 1280's in the back. With the 10 bags i have i put two under each bag which gives me 6 bags to move. I usually put them on the surf side.
2016 Mojo
2010 Moomba LSV-Sold
-
07-19-2017, 08:54 PM #26
I don't think they would move much at all. The floor of the rear locker is slightly lower than the floor under the seats so they would sit down in there
Sent from my iPhone using TapatalkDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD