Results 1 to 7 of 7
-
06-08-2017, 11:08 AM #1Senior Member
- Join Date
- Mar 2012
- Location
- Uniontown, oh
- Posts
- 263
Adding another set of tower speaker
Here's what I currently have, 2012 mojo. 4 cockpit, 2 bow, sub and 2 tower speakers. 2 kicker factory amps. 1 long and one short. Boat is at lake so I can't get models on them now. I just picked up another set of Roswell tower speaks to match the one on the boat.
Do I need a new amp or can I use what I have? Thanks
Sent from my iPhone using TapatalkNick
2012 moomba mojo 2.5
2005 Moomba outback-sold
-
06-08-2017, 11:29 AM #2
You can never have tooooooooooooo many tower speakers!
http://www.wakeworld.com/forum/showthread.php?t=8060432017 Centurion Ri237
2013 Supra SA450 - Sold
2006 Mobius LSV - Sold
2004 Stingray 190LS - Sold
2016 Nissan Titan XD - Tow Rig
-
06-08-2017, 11:35 AM #3
Your model should have a 5 chnl amp that drives the 6 in-boats and woofer. What ever 2nd amp is there, should allow you to wire up a 2nd pair of tower speakers.
-
06-08-2017, 11:49 AM #4Senior Member
- Join Date
- Mar 2012
- Location
- Uniontown, oh
- Posts
- 263
What size speaker wire do I need so I get the right supplies before I head down to the lake? Thanks
Sent from my iPhone using TapatalkNick
2012 moomba mojo 2.5
2005 Moomba outback-sold
-
06-08-2017, 11:50 AM #5Senior Member
- Join Date
- Mar 2012
- Location
- Uniontown, oh
- Posts
- 263
-
06-08-2017, 12:41 PM #6
I think 14ga would be a more than ample guess. You may only need enough to go from one existing speaker to the new speaker next to it, same for the other side. However, id plan on enough to run a dedicated run for each new speaker. 25-30 ft p/speaker.
-
06-08-2017, 07:35 PM #7Senior Member
- Join Date
- Mar 2012
- Location
- Uniontown, oh
- Posts
- 263
Interesting. I was wondering if I could piggy pack of the existing speakers.
Sent from my iPhone using TapatalkNick
2012 moomba mojo 2.5
2005 Moomba outback-sold