Results 1 to 4 of 4
Thread: 2017 Craz Setup
-
01-27-2018, 08:20 PM #1
Junior Member
- Join Date
- Feb 2016
- Location
- Cumming GA
- Posts
- 16
2017 Craz Setup
I have a 2017 Craz with the surf package (2 900s in the rear and I think a 450 on the nose) what is a good setup I should run for wakeboarding. I don't have autowake
Sent from my iPhone using TapatalkLake Lanier
1999 Sea Ray br180- Sold
07 outback v
-
01-28-2018, 11:02 AM #2
Senior Member
- Join Date
- Nov 2010
- Location
- Katy, TX
- Posts
- 6,369
I would try the front all the way full and the rear half full. If the wake is clean far behind you at your riding speed with the wake plate all the way up then I would increase the rear ballast until the wash got right behind the rider.
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
01-28-2018, 01:28 PM #3
Senior Member
- Join Date
- Sep 2015
- Location
- UT 6000'
- Posts
- 1,481
I would go with all full and roll from there. You should have the mid tank and then the IBS so the boat will handle full ballast everywhere. Plan about 23 mph and get ready for a heck of a day on the water.
18485494_1339710776118375_8474834252495571285_n.jpg
-
01-28-2018, 08:41 PM #4
Senior Member
- Join Date
- Aug 2011
- Location
- Commerce Lake, MI
- Posts
- 2,145
I go all full and I have 1100s in the rear lockers of my 2017 Craz
Sent from my iPad using Tapatalk2017 Moomba Craz
Reply With Quote