Help adding amp to craz

[Jdrundell]

I'm going to add an amp for my new rev 10s but I'm wondering if there's RCA cables ran for the new amplifier already or do I need to run those?

[That Guy]

I had to run RCA's when I added Rev10's to my tower.

[Alerberg]

I also had to run RCA's when I added Amp....

Good Luck!

[TrueKaotik]

You will need to add the RCAs like mentioned, they only add them if you had the tower package added on at the factory from what I have seen.

[Jdrundell]

Any idea how long they need to be?

[TrueKaotik]

I believe 20ft off top of my head. You will run it around bow.

[BigOrange]

Go longer than needed. I think a lot of RCA's were sold as 6M which come up short. I had multiple runs of the long RCA's provided with Exile's ZLD and wound up about 2 to 3 foot short and had to add couplers and extra cables.

[jbird]

Order 25' if possible. I just wired a ZLD from the helm and made due with 20'ers but it was a little tight.