Results 1 to 10 of 13
Thread: Engine Storage Tray
-
05-23-2017, 03:15 PM #1
Engine Storage Tray
Some of you have asked about the Malibu tray I ordered. Turns out it didn't drop right in the way I was hoping. The tray I ordered was for an 07 wakesetter 247, but I didn't know that at the time. I had to do major modifications to it to make it work. See below:
Original tray:
I had to cut the sides off to make it the correct width.
'08 Mobius LSV- SOLD!
2017 Mojo Pro
-
05-23-2017, 03:15 PM #2
Then I found that it was too deep and needed to be shortened. I did that by cutting the back wall in half and riveting it back together shorter.
'08 Mobius LSV- SOLD!
2017 Mojo Pro
-
05-23-2017, 03:16 PM #3
After that, I needed to put the sides back on it so stuff stays put. More riveting.
'08 Mobius LSV- SOLD!
2017 Mojo Pro
-
05-23-2017, 03:17 PM #4
A little more cutting to get it all dialed in.
Overall, I'm happy with it and really like having the convenient storage option.'08 Mobius LSV- SOLD!
2017 Mojo Pro
-
05-23-2017, 03:59 PM #5
did they have it in stock or did you have to order it
my contact stated that the item # was a 07 247 wakesetter and was out of stock and discontinuedA Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-23-2017, 04:02 PM #6
-
05-24-2017, 06:41 PM #7
You could have vacuum formed a piece of plastic with all that work.
Sent from my iPhone using Tapatalk Pro2008 Moomba Outback DD resurrection
-
05-24-2017, 09:30 PM #8
Yes, but I live in the middle of no where. It's DIY or nothing.
'08 Mobius LSV- SOLD!
2017 Mojo Pro
-
05-25-2017, 12:24 AM #9
-
05-25-2017, 08:14 AM #10
A wooden jig, a piece of plastic, your oven and a vacuum cleaner. Cheap.
Sent from my iPhone using Tapatalk Pro2008 Moomba Outback DD resurrection