Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24
  1. #21
    Join Date
    Apr 2016
    Posts
    223

    Default

    ^^^that only works for stopping the engine. when you restart it, the HU power is interrupted while engine restarting. Also, i think it's good practice when restarting the engine, to pause on the "run" position for a few seconds before hitting the starter, so that the trim tabs and controller can go thru it's pre-start checks before firing up the motor. Some people have had issues w/the tabs getting out of sync w/the computer and causing issues, and this may avoid that. ...but this delays the HU from turning back on in a timely manner. Rewiring to a separate ACC switch is the best option (IMO).
    2016 Craz

  2. #22
    Join Date
    Jul 2021
    Posts
    100

    Default

    Quote Originally Posted by Pound View Post
    ^^^that only works for stopping the engine. when you restart it, the HU power is interrupted while engine restarting. Also, i think it's good practice when restarting the engine, to pause on the "run" position for a few seconds before hitting the starter, so that the trim tabs and controller can go thru it's pre-start checks before firing up the motor. Some people have had issues w/the tabs getting out of sync w/the computer and causing issues, and this may avoid that. ...but this delays the HU from turning back on in a timely manner. Rewiring to a separate ACC switch is the best option (IMO).
    Anyone have a picture of the wires needed to be moved? Have a 2022 with dual batteries and would like the stereo to stay on as well.

    Does the simple acc switch stop still kill the audio when cranking over the starter?

  3. #23
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,700

    Default

    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

  4. #24
    Join Date
    Jul 2021
    Posts
    100

    Default

    Quote Originally Posted by 996scott View Post
    Good info. Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •