Results 1 to 10 of 43
Thread: 2007 xlv gravity games edition
-
05-22-2017, 11:47 PM #1Junior Member
- Join Date
- May 2017
- Posts
- 13
2007 xlv gravity games edition
any one have or know where I can find a swim platform for my Moomba mine was stolen in lake havasu so I'm in need of one any help would be appreciated
-
05-23-2017, 06:57 AM #2
If i was you I would just buy the new style Surf platform from dealer
Sent from my iPhone using TapatalkMalo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
05-23-2017, 08:12 AM #3
-
05-23-2017, 08:54 AM #4
$$$ pricey though
what color couple members on here made there own surf platforms might be willing to sellLast edited by jmvotto; 05-23-2017 at 09:01 AM.
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-23-2017, 09:26 AM #5
Maybe make your own?
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
05-23-2017, 10:32 AM #6
That really sucks. I am guessing they also took the brackets as well? If you are going to buy new shaped one you are probably looking at around $1,200 all in with paint etc from what I have seen on here. An older stock '07 used one will probably cost $200-300 to ship at least.
I just finished making my own. I have to keep my old platform because if the wife doesn't like the new one the old one goes back on. I went to a dealer with a big piece of cardboard and traced a 2016 Craz platform. I drew it out in Adobe Illustrator, plotted, traced, cut, routed and sanded a piece of 1" HDPE which cost about $300 all in. I topped it off with Black Tip traction mat and done. I may bevel the edge of the mat still.
It is not installed yet but I will take some pics tonight. I have the plans I can e-mail you or I have an extra set i already printed you can use as templates for the platform and the mat and I can send you those.
In the mean time if you still have the brackets you can quickly make one out of wood with some kind of traction to get you through the weekend.2007 XLV Gravity Games
Full Wake Makers upgraded ballast and pumps
1,100 in each rear locker
1,180 in front
OJ 1435 prop, 325 EFI Indmar Assult.
Fresh Air Exhaust
SuckG8
Bunch of other crap
-
05-23-2017, 12:19 PM #7
What color is your boat? I have a stock platform (no brackets) that has been sitting on the side of my house for a while... I can't imaging it would be cheap for shipping it though. it's heavy as hell and undoubtedly oversized.
2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
www.TraysonsToybox.com
-
05-23-2017, 07:33 PM #8Member
- Join Date
- Oct 2012
- Location
- edmonds, wa
- Posts
- 46
When i had my moomba i lost my platform while moored on the lake in a bad wind storm. I had to have sc build me a new one. It was for a 02 lsv and it took about 7 weeks to get it as they build them from scratch for older modles. I believe it cost me about $750 shipped to my house. However i did have to have the dealer order it for me and just asked them to direct ship to me.
Sent from my SM-G900P using Tapatalk2002 outback lsv 320 tbi
02 f 150 supercrew lariat
-
05-23-2017, 07:58 PM #9
Here is what I ended up making. Let me know if you need the templates.
2007 XLV Gravity Games
Full Wake Makers upgraded ballast and pumps
1,100 in each rear locker
1,180 in front
OJ 1435 prop, 325 EFI Indmar Assult.
Fresh Air Exhaust
SuckG8
Bunch of other crap
-
05-23-2017, 08:03 PM #10
Nice job!
Sent from my iPhone using Tapatalk2017 Moomba Craz