Results 1 to 5 of 5
Thread: Craz ballast upgrade
-
05-21-2017, 06:38 AM #1
Craz ballast upgrade
Hey guys I purchased the 1140 sacs from wake makers and I noticed there are 5 ports in the new bags and there were only 3 in the old ones. They sent me a kit that came with 2 fittings and a vent kit. Any ideas
-
05-21-2017, 08:46 AM #2
I use two ports on my 1100's. Top for vent, and bottom rear for fill/empty
Sent from my iPad using Tapatalk2017 Moomba Craz
-
05-21-2017, 05:42 PM #3
I used the single one on the back for the fill, one of the top two for vent, plugged the other top one, and plugged the other bottom two that are almost side by side
2017 Craz surf auto wake
1140 # rears wet sounds
-
05-21-2017, 07:23 PM #4
Ok thanks for the help so the vent/ over flow from wake makers you didn't use you just used the stock one
-
05-21-2017, 07:31 PM #5
Correct, I actually ordered individual pieces for the bags instead of ordering their kit , I did 4 fittings for fill and vent , plugged into factory connections, didn't see any need for extra hose, there was plenty from factory, and plugged the rest of the ports
2017 Craz surf auto wake
1140 # rears wet sounds