Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Won't start

  1. #11
    Join Date
    Mar 2017
    Location
    Madison, WI
    Posts
    34

    Default

    Boat started up at the dock no problem yesterday. Ran for about an hour and decided to anchor up. After over an hour anchored, went to start and nothing again. Tried to reset breakers but still nothing. Jumped it at the starter solenoid and fired right up. I gauges read normal so I don't think there is something with the engine.

  2. #12
    Join Date
    May 2013
    Posts
    253

    Default

    I think this is a classic "your solenoid is bad" senerio. Works fine when cold, doesn't when heat sinked. Has been successfully jumped twice.....

  3. #13
    Join Date
    Mar 2017
    Location
    Madison, WI
    Posts
    34

    Default

    I believe it is a bad connection or wire somewhere in the engine area. I was following the wire from the ignition and as soon as I moved the wire harness near the starter, it turned over.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •