Results 31 to 40 of 41
Thread: Having issues, help!!
-
05-10-2017, 12:00 AM #31Junior Member
- Join Date
- May 2017
- Posts
- 23
Does anyone know where I could get the correct fuel pressure regulator. The only one I can find is for like 12psi like the cars have. I've called several parts dealers online and none of them offer the regulator that goes into the throttle body like mine has.
Sent from my iPhone using Tapatalk
-
05-10-2017, 07:10 AM #32Senior Member
- Join Date
- Oct 2004
- Location
- Middle TN
- Posts
- 148
Have you tried an Indmar dealer?
-
05-10-2017, 08:05 AM #33
Did you try Bake's? If you don't see what you need give them a call.
http://www.bakesonline.com/SearchRes...re%20regulator
Or ski dim?
http://www.skidim.comMy Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
05-10-2017, 02:32 PM #34Junior Member
- Join Date
- May 2017
- Posts
- 23
I've tried dealer and both bakes and ski dim they both are telling me that the part is not available through indmar that I have to get it from the parts store but the one at the parts store is not the correct psi. I don't see why indmar wouldn't offer it. If tried to contact them directly but can't seem to find a number for them only email
Sent from my iPhone using Tapatalk
-
05-10-2017, 09:30 PM #35Senior Member
- Join Date
- Oct 2004
- Location
- Middle TN
- Posts
- 148
-
05-11-2017, 11:27 AM #36Junior Member
- Join Date
- May 2017
- Posts
- 23
All I have is the hull id number. I'll look on the engine tonight and see what I can find
Sent from my iPhone using Tapatalk
-
05-11-2017, 04:14 PM #37Senior Member
- Join Date
- Aug 2006
- Location
- Millington TN
- Posts
- 204
The fuel pump safety switch and the v-drive switch work opposite of each other. The fuel pump switch is closed when the engine is running and there is oil pressure which allows the fuel pump to run. The v-drive switch opens when there is pressure and turns the warning light off. The fuel pump switch is P/N 501013 and is only used on carbureted engines. The Walter V-drive switch is P/N 903004S.
Larry Engelbert
Indmar Marine Engines
"Power to the Sport"
-
05-11-2017, 04:26 PM #38Senior Member
- Join Date
- Aug 2006
- Location
- Millington TN
- Posts
- 204
[QUOTE=Bean;306311]I've tried dealer and both bakes and ski dim they both are telling me that the part is not available through indmar that I have to get it from the parts store but the one at the parts store is not the correct psi. I don't see why indmar wouldn't offer it. If tried to contact them directly but can't seem to find a number for them only email
/QUOTE]
For some reason our parts people have not been able to acquire the fuel pressure regulator for the higher pressure (nominal 30 PSI) throttle body. I have sent customers to a company called Throttle Body Injection (www.throttlebodyinjection.com) for help. I would check them out.Larry Engelbert
Indmar Marine Engines
"Power to the Sport"
-
05-11-2017, 08:41 PM #39Junior Member
- Join Date
- May 2017
- Posts
- 23
I've got everything on and it runs good on the hose I haven't made it in for a water test yet. Now I'm having high idle. Idling about 1600 or so
Sent from my iPhone using Tapatalk
-
05-11-2017, 09:12 PM #40Junior Member
- Join Date
- May 2017
- Posts
- 23
If I unplug the tps it drops to 1000
Sent from my iPhone using Tapatalk