17 Mojo Stereo Setup!

[jbird]

David,
Did you end up changing the dimensions of your original "rough draft" box design you posted (awesome posting of detailed drawing btw!)? I'm getting ready to start a very similar sub install and this thread has helped me a ton!

[rdlangston13]

David,
Did you end up changing the dimensions of your original "rough draft" box design you posted (awesome posting of detailed drawing btw!)? I'm getting ready to start a very similar sub install and this thread has helped me a ton!

Yeah, I downloaded a free program called WinISD and it helped me figure out my port size and dimensions so it changed a big. If you need a box for an XS-12, mine should be good haha. We will see in a month or so how it sounds.

[dusty2221]

Not to mention going ahead and upgrading to the Wetsounds inboats...this thing is gonna jam!

[rdlangston13]

To celebrate our spray date I decided to buy stuff for the boat! I picked a 3 bank 30 amp charger, all the power and rca cables needed for the install, a new box anchor, battery boxes for the future golf cart batteries, dual battery switch, anchor buddy, and some transom straps. Should be fun when it gets here throwing all this in


Sent from my iPhone using Tapatalk

[rdlangston13]

So I'm trying to get the stereo set up on an acc switch but all then switches have wire coming out the back of them, where to I connect my 12 turn on wire at??


Sent from my iPhone using Tapatalk

[MLA]

First need to confirm its an used switch. Pretty common for them to be pre-wired, but not connected on the other end of the wire if a particular option was not ordered/installed. Next, use a volt meter to find which terminal is the switched out. IMO, I just pull that wire off, tape it off and tie it back. Plug up my wire.

[moombahighrider]

So I'm trying to get the stereo set up on an acc switch but all then switches have wire coming out the back of them, where to I connect my 12 turn on wire at??


Sent from my iPhone using Tapatalk

David, do you have the ACC switch? Look up above the steering column for some wires that are ziptied out of the way. They are labeled ACC. There is 3 of them- you just need the red and black wires.

[rdlangston13]

I got it, I just tired it into the 12 volt constant wire and I'll just turn it on an off with the button on the head hnit


Sent from my iPhone using Tapatalk

[moombahighrider]

I got it, I just tired it into the 12 volt constant wire and I'll just turn it on an off with the button on the head hnit


Sent from my iPhone using Tapatalk

What head unit are you using? Typically, you would tie the constant straight to the battery and the switched to the acc. That way, it has memory via the battery.

[moombahighrider]

I just re read your post. Looks like you got it. I would tie head unit switched wire to the acc switch but your way might work also, provided the switched wire has power also