Underwater LED's

[Cody]

bear.jpg

Found their inspiration

[Stazi]

Not sure it would fit the Craz. It may be too thick.


Sent from my iPhone using Tapatalk

[iwannagofast]

Found this gem on Facebook ads tonight.

New product from boat plug light. 2 versions, 1 light & 2 light. Not bad if it will work, I think it would because your replacing the entire housing.

Thoughts?

https://www.boatpluglight.com/collec...en-drain-light




Sent from my iPhone using Tapatalk

Anyone give this one a shot yet?

[eusst1]

any luck with this yet?

[iwannagofast]

any luck with this yet?

Ended up going with the Titan 2. Go big or go home right?!

https://boatpluglight.com/collection...-16-000-lumens

Had to shave off a portion of the body to make it clear the wakeplate similar to Stazi in this post.

Underwater LED install
https://r.tapatalk.com/shareLink?sha...9&share_type=t


Sent from my iPhone using Tapatalk

[Stazi]

Ended up going with the Titan 2. Go big or go home right?!

https://boatpluglight.com/collection...-16-000-lumens

Had to shave off a portion of the body to make it clear the wakeplate similar to Stazi in this post.

Underwater LED install
https://r.tapatalk.com/shareLink?sha...9&share_type=t


Sent from my iPhone using Tapatalk

Dang that Titan 2 is definitely made for Deadmau5 fans!


Sent from my iPad using Tapatalk

[iwannagofast]

Dang that Titan 2 is definitely made for Deadmau5 fans!


Sent from my iPad using Tapatalk

with the Titan 2 and RGBs in my Rev10s it’s definitely a light show lol

Plan on stepping it up one more notch and running RGBs around the whole boat above the cup holders this weekend or next.

I’ll post some pics and videos once everything is complete


Sent from my iPhone using Tapatalk

[Broke Pilot]

I definitely admire you guys who have the patience to run all that RGB wire around your boat. I’d shoot myself. I love the way it looks, some of Dusty’s installs are nuts with the zone control. Glad my new boat came pre-lit! Lol

[clad]

Did you get the Titan installed? I would be interested in some pics and thoughts if you can share. I have been looking at the same install.

[rdlangston13]

I was looking at my 2017 Craz the other day, and it appears that all the new boats must be pre-wired from the factory for underwater lights. One of the accessory switches on the dash has a blue wire with a green stripe, I traced this wire all the way back to the transom (tucked in up and to the right -way up) and there is a butt connector there, along with a black negative also with a butt connector. So you can hook up one of those drain plug LED lights. I have one on order, so it should be simple to install and crimp to the existing butt connectors.
PS there is also a breaker under the dash for underwater lights that is 3A

Sent from my iPad using Tapatalk

Guess I am going to have to run my own wiring then if it is only set up for 3 amps. I am looking at getting two SeaBlaze X's in blue and they pull 5 amps each. Plan to have them in by the 4th of July.