Underwater LED's

[Cody]

Has anybody got the underwater LED's as an option from the factory? Do you get your choice of color or is it a standard color? Pictures are appreciated.

Low lights would be nice to see as well.

Thanks in advance

[dusty2221]

They are blue.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[KG's Supra24]

2016 factory underwaters ....

In Arkansas water





Sent from my SM-G928V using Tapatalk

[dusty2221]

Show it to them in murkey water

[KG's Supra24]

Nope, can't do it.

[Cody]

Yeah, we need to see it in the murk like Trinity.

[smorris7]

Yeah, we need to see it in the murk like Trinity.

You can't even see your feet standing on the platform in the T!


Sent from my iPhone using Tapatalk

[Stazi]

I was looking at my 2017 Craz the other day, and it appears that all the new boats must be pre-wired from the factory for underwater lights. One of the accessory switches on the dash has a blue wire with a green stripe, I traced this wire all the way back to the transom (tucked in up and to the right -way up) and there is a butt connector there, along with a black negative also with a butt connector. So you can hook up one of those drain plug LED lights. I have one on order, so it should be simple to install and crimp to the existing butt connectors.
PS there is also a breaker under the dash for underwater lights that is 3A

Sent from my iPad using Tapatalk

[rdlangston13]

I was looking at my 2017 Craz the other day, and it appears that all the new boats must be pre-wired from the factory for underwater lights. One of the accessory switches on the dash has a blue wire with a green stripe, I traced this wire all the way back to the transom (tucked in up and to the right -way up) and there is a butt connector there, along with a black negative also with a butt connector. So you can hook up one of those drain plug LED lights. I have one on order, so it should be simple to install and crimp to the existing butt connectors.
PS there is also a breaker under the dash for underwater lights that is 3A

Sent from my iPad using Tapatalk

Guess I am going to have to run my own wiring then if it is only set up for 3 amps. I am looking at getting two SeaBlaze X's in blue and they pull 5 amps each. Plan to have them in by the 4th of July.

[rdlangston13]

Does anyone know what the amp rating is for the dash switches? Would they be able to run 10 amp without a relay?