Results 1 to 3 of 3
Thread: Raw water impeller
-
04-10-2017, 09:44 PM #1
Raw water impeller
Does anybody have an exact picture showing where the impeller goes and tips to remove and replace
Sent from my SM-G920W8 using Tapatalk2015 lsv purple metal flake
-
04-11-2017, 10:20 AM #2
Here are two pics that should give you what you need:
Housing.jpg
Impeller.jpg
http://www.inboardonline.com/how-to/
https://forum.moomba.com/showthread....nging-impeller
https://forum.moomba.com/showthread....er-replacementLast edited by kaneboats; 04-11-2017 at 10:24 AM.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-18-2017, 09:20 PM #3
I use needle vise grip to remove it. to replace: put the impeller in the pump.....turn it in the good direction so the rubber fins go in the good direction.... tap it lightly with a rubber mallet until it goes in place put back the cover with the seal ( I tighten the screws in a way to have an equal pressure on the seal)..don t forget to put lube on the impeller
Mobius LSV 2011
GIII, V2 Tower, Indmar 325,