Results 1 to 9 of 9
  1. #1
    Join Date
    Oct 2016
    Location
    Tims Ford Lake TN
    Posts
    453

    Default Identify wire please

    After getting my amp rack back in for the reinstall, I have one wire coming over with the others from the head unit that I can't figure out or remember what it is. It's yellow and black striped. It had to be hooked with the old amp somehow because it didn't have a ring terminal for the distro block.

    Is this a ground that needs hooked up?
    2016 Mojo Surf
    Raptor 400
    1100 rear bags / 500 IBS / 600 LeadWake
    Exile amps/tower - Kicker in-boat
    FAE

  2. #2
    Join Date
    Oct 2016
    Location
    Tims Ford Lake TN
    Posts
    453

    Default

    I should mention that this is from 2016 Mojo, Fusion Head Unit that had the factory Kicker 200.2 amp running the towers.
    2016 Mojo Surf
    Raptor 400
    1100 rear bags / 500 IBS / 600 LeadWake
    Exile amps/tower - Kicker in-boat
    FAE

  3. #3
    Join Date
    Oct 2016
    Location
    Tims Ford Lake TN
    Posts
    453

    Default

    Bump......Dusty, MLA, TruKaotik, BrettLee, any of you all have some insight. Just want to be sure before powering up and harming something. I should note that its black with yellow stripe, not the other way around. Some poking around on the net lends to a kill switch wire, but again, I'm not sure why that wouldn't have been grounded elsewhere? Is that something that Moomba would have done is just jam that in at the amp ground location for convenience?
    2016 Mojo Surf
    Raptor 400
    1100 rear bags / 500 IBS / 600 LeadWake
    Exile amps/tower - Kicker in-boat
    FAE

  4. #4
    Join Date
    Dec 2012
    Location
    Ennis, TX
    Posts
    841

    Default

    Is it the remote turn on wire for the amp?


    Sent from my iPhone using Tapatalk
    Shane
    2016 Supra SE
    EXILED
    6 XM9 Tower
    6 Wetsounds XS650 Cabin
    1 EXILE BIG 12 DVC 2000 watt in a ported box
    1 XM 15.4
    XI 1500.1
    2 MX 30.2
    Wetsounds 420 EQ
    EXILE Blue tooth EXBT4
    Blue LEDs

  5. #5
    Join Date
    Oct 2016
    Location
    Tims Ford Lake TN
    Posts
    453

    Default

    No, at least I assume. I have the blue and white stripe coming there in the same location that is the standard convention for the amp remote turn-on.
    2016 Mojo Surf
    Raptor 400
    1100 rear bags / 500 IBS / 600 LeadWake
    Exile amps/tower - Kicker in-boat
    FAE

  6. #6
    Join Date
    Dec 2012
    Location
    Ennis, TX
    Posts
    841

    Default

    Quote Originally Posted by BigOrange View Post
    No, at least I assume. I have the blue and white stripe coming there in the same location that is the standard convention for the amp remote turn-on.
    Not sure what else it could be. 12 volt power, Ground and remote are all the connect to the amp on the power side.


    Sent from my iPhone using Tapatalk
    Shane
    2016 Supra SE
    EXILED
    6 XM9 Tower
    6 Wetsounds XS650 Cabin
    1 EXILE BIG 12 DVC 2000 watt in a ported box
    1 XM 15.4
    XI 1500.1
    2 MX 30.2
    Wetsounds 420 EQ
    EXILE Blue tooth EXBT4
    Blue LEDs

  7. #7
    Join Date
    Nov 2014
    Posts
    704

    Default

    Yes, it's the ground for your head unit. I just went through this the other day. My head unit wouldn't turn on because I didn't reconnect that ground. I traces the wire back to the HU, where it was labeled "ground"
    2016 Craz.
    Enzo bags.

  8. #8
    Join Date
    Oct 2016
    Location
    Tims Ford Lake TN
    Posts
    453

    Default

    Quote Originally Posted by mattsask View Post
    Yes, it's the ground for your head unit. I just went through this the other day. My head unit wouldn't turn on because I didn't reconnect that ground. I traces the wire back to the HU, where it was labeled "ground"
    Great, thanks!
    2016 Mojo Surf
    Raptor 400
    1100 rear bags / 500 IBS / 600 LeadWake
    Exile amps/tower - Kicker in-boat
    FAE

  9. #9

    Default

    Sorry... I havnt ran into a yellow/black but they do run a ground over since late 15' for noise.. mine have all been black, if it was a dealer fix, they used what they had..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •