Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Hinge seats

  1. #11
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    Murder Max Mods
    https://r.tapatalk.com/shareLink?sha...8&share_type=t

    Here’s how I’m doing mine

    Interested in pics of the Supra’s that hinge towards the bow if anyone has some?
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  2. #12
    Join Date
    May 2016
    Location
    Fargo, ND
    Posts
    127

    Default

    I added some heavy duty outdoor velcro to my seats to stop them from flying out when traveling. Simple and cheap insurance since I trailer without my cover to prevent the top rail of my black boat from wearing.
    2016 Mojo

  3. #13
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    1,590

    Default Hinge seats

    Quote Originally Posted by z28ke View Post
    Murder Max Mods
    https://r.tapatalk.com/shareLink?sha...8&share_type=t

    Here’s how I’m doing mine

    Interested in pics of the Supra’s that hinge towards the bow if anyone has some?
    I copied this and completed the install today. So far I am happy with it and feel that I can access the boards that I store under the side seats. I even added a pull strap.



    Sent from my iPhone using Tapatalk
    Last edited by Boonejeepin; 01-29-2019 at 07:17 PM.
    2018 Max with a little extra weight here and there

  4. #14
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    Quote Originally Posted by Boonejeepin View Post
    I copied this and completed the install today. So far I am happy with it and feel that I can access the boards that I store under the side seats. I even added a pull strap.



    Sent from my iPhone using Tapatalk
    Nice! I like the strap idea, I’ll have to do the same.

    Sneak peak at another mod I’m working on:

    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  5. #15
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    1,590

    Default

    Quote Originally Posted by z28ke View Post
    Nice! I like the strap idea, I’ll have to do the same.

    Sneak peak at another mod I’m working on:

    Great idea. The storage is deep enough that layers of storage is possible. How are the hangers fastened?


    Sent from my iPhone using Tapatalk
    2018 Max with a little extra weight here and there

  6. #16
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    Thanks, I figured this way I can store some stuff in there and not have to rearrange or check on it when filling the 720’s.

    The fiberglass in the area circled below is very thin (I though I had a short enough screw but ended up popping up the gel slightly in the first hole, so I ended up using jb water weld along with a screw barely in the fiberglass to hold the plastic clips on that side. On the other side I went down a few inches to give a little more space and used a screw to hold them to the seat base (vertical wall - much thicker fiberglass) instead of the underside.



    The net wasn’t quite as wide as I liked so I used some zip ties to make it sit right in the middle and also reduce the tension. It’s still removes the same, no need to cut the zip ties as they just slide over the plastic clips/hooks like the net would without them.

    Tip: use a drill, not an impact driver to put screws in fiberglass. The impact spins so fast the screw acts as a drill bit and never bites, but does leave a hole lol.
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •