Results 1 to 10 of 21
-
03-28-2017, 05:22 AM #1Junior Member
- Join Date
- Sep 2016
- Posts
- 2
About to install a Monster cargo rack bimini but I dont want to drill holes
I have seen a little info on this but does anyone know if there is an easy way to use clamps instead of putting holes in the tower?
I have seen some other similar bimini tops with clamps and was wondering if any of those would fit with the monster bimini?
Or should I just drill and forget about it?
Thanks!2007 Mobius LSV
-
03-28-2017, 12:10 PM #2
on a 2007, I'd forget about it and drill the holes. Do a search for Monster Cargo Bimini and I think you'll find my original write up plus one from Captn Craig (?) where he used clamps vs drilling into the tower.
-
03-28-2017, 03:13 PM #3
this is how my monster cargo bimini was installed:
2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
www.TraysonsToybox.com
-
03-28-2017, 09:06 PM #4
Did you weld the mounts to those clamps?
Sent from my iPad using Tapatalk2017 Moomba Craz
-
03-28-2017, 09:20 PM #5
I'm not sure where you'd source them, but I'm pretty sure they were machined that way to accommodate the ball and socket... I did some searching and I'm honestly not sure where to source the clamps... Maybe try these guys: http://www.greatlakesboattop.com/
2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
www.TraysonsToybox.com
-
03-28-2017, 09:41 PM #6
I just drilled them in my old Möbius.
Sent from my iPad using Tapatalk2017 Moomba Craz
-
03-29-2017, 10:08 AM #7Senior Member
- Join Date
- Oct 2009
- Location
- Lockport, IL/Cloverdale, MI
- Posts
- 185
I drilled following Drew's writeup.
2008 Outback V
-
03-31-2017, 05:43 AM #8
-
03-31-2017, 06:04 AM #9
-
03-31-2017, 11:01 AM #10
Yes. I'm sure. Aside from the clamps, every other detail is spot on. The canvas layout, the bungees, even the corner loops for attaching the tube carrier.
But you might be right... They could be z5 clamps. I've seen a pic of those clamps on a z5 install instruction post before2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
www.TraysonsToybox.com