Summarize:help with bolt

[jtatexc]

I am going out in a couple hours for the first time this season. Went to prep the boat and found that dealership pulled a bolt that last year they did not. Anyone know where this goes?

Sent from my SAMSUNG-SM-G930A using Tapatalk

[drb59]

That is your drain plug at the back of the boat

[mattsask]

I am going out in a couple hours for the first time this season. Went to prep the boat and found that dealership pulled a bolt that last year they did not. Anyone know where this goes?

Sent from my SAMSUNG-SM-G930A using Tapatalk

I think that's the one that you have to access through the floor hatch. Tranny or v drive... whichever it is. Is it like 1" or something like that?

[jtatexc]

I think that's the one that you have to access through the floor hatch. Tranny or v drive... whichever it is. Is it like 1" or something like that?

OK I'll go look in that hatch. Def not drain plug, I've pulled that out a few times times plus or minus. This goes in the block or something.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[jtatexc]

I am in the hatch and cannot see anywhere this thing goes

Sent from my SAMSUNG-SM-G930A using Tapatalk

[mattsask]

Pull the four screws that hold in the hatch housing.

[mattsask]

Should be on the face that's nearest the front of the boat. It's a real pita to get at if I remember correctly.

[rdlangston13]

That looks like a sacrificial anode. Probably goes on the marine cooler or exhaust manifold meant to prevent rust.

[jtatexc]

Matt you're the man!! Thanks bro!

Sent from my SAMSUNG-SM-G930A using Tapatalk

[mattsask]

My craz doesn't have any plug manifolds. There is one similar in that black pot looking thing near the back of the engine on the drivers side, I think. Oh man this is driving me nuts too. Hope you find it. My manual is in storage, otherwise I'd go.grab it for you.