Results 11 to 20 of 23
Thread: Summarize:help with bolt
-
03-19-2017, 11:12 AM #11
That is an anode for the V Drive
Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
03-19-2017, 11:13 AM #12
I believe it takes a 1 1/16" socket, and you will want the socket
Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
03-19-2017, 11:15 AM #13
-
03-19-2017, 11:16 AM #14
Got it in. Now what is making me nervous is that it only threaded about half way in before it getting tight so half the threads are popped out. I am fairly certain it is not cross threaded. I didn't ever tighten to make sure it didn't screw anything thing up. I'll just keep an eye on it when I launch. Fingers crossed...
Sent from my SAMSUNG-SM-G930A using Tapatalk
-
03-19-2017, 11:17 AM #15
-
03-19-2017, 11:24 AM #16
If anyone out there reads this and has access to check, I would super appreciate knowing if anyone else has some thread exposed or if the hex of this bolt is flush with the v-drive
Sent from my SAMSUNG-SM-G930A using Tapatalk
-
03-19-2017, 11:28 AM #17
Could be some rust preventing it from seating
Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
03-19-2017, 11:29 AM #18
I'm almost positive mine had like a half inch of thread showing.
2016 Craz.
Enzo bags.
-
03-19-2017, 11:34 AM #19
Sent from my iPhone using Tapatalk15 Mondo Surf Edition
02 LSV - Traded In
-
03-19-2017, 11:35 AM #20
You need to put some pipe tape on it. This should be a pipe thread bolt which is slightly tapered and will not go in all the way.
Sent from my iPhone using Tapatalk15 Mondo Surf Edition
02 LSV - Traded In