Results 1 to 8 of 8
Thread: Prop Identification
-
03-09-2017, 07:59 PM #1Member
- Join Date
- Jul 2009
- Location
- Syracuse Utah
- Posts
- 93
Prop Identification
Can anyone tell me about this prop? Is it the original that came with the boat?
I need something for high elevation because I'm in Utah. Will this work?
Sent from my iPhone using Tapatalk2013 Moomba LSV
-
03-10-2017, 07:52 AM #2
Yes that is the stock OJ prop. What boat are you in and how much weight are you running?
Sent from my iPhone using TapatalkShane
2016 Supra SE
EXILED
6 XM9 Tower
6 Wetsounds XS650 Cabin
1 EXILE BIG 12 DVC 2000 watt in a ported box
1 XM 15.4
XI 1500.1
2 MX 30.2
Wetsounds 420 EQ
EXILE Blue tooth EXBT4
Blue LEDs
-
03-10-2017, 10:19 AM #3Member
- Join Date
- Jul 2009
- Location
- Syracuse Utah
- Posts
- 93
-
03-10-2017, 10:42 AM #4
Acme 1235 would work very well. Maintain some of your top end but hole shot will dramatically improve. I used the 1235 on my mojo but when I upgraded my ballast, (I run around 4500 in ballast) I switched to the acme 2079 which is a beast. We mostly surf so I needed the torque out of the hole.
Sent from my iPhone using TapatalkShane
2016 Supra SE
EXILED
6 XM9 Tower
6 Wetsounds XS650 Cabin
1 EXILE BIG 12 DVC 2000 watt in a ported box
1 XM 15.4
XI 1500.1
2 MX 30.2
Wetsounds 420 EQ
EXILE Blue tooth EXBT4
Blue LEDs
-
03-10-2017, 10:44 AM #5
Get an ACME.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
03-10-2017, 12:31 PM #6
-
03-12-2017, 05:19 AM #7
I have a 2013 LSV with over 3500 plus passengers and the ACME 1617 is perfect. Trust me, you will not be disappointed.
Sent from my iPhone using Tapatalk2013 LSV Red/White
1100lb upgrades in each rear locker!
Stock 500 Bow ballast
650IBS
Manual Flow equipped
Boards
Hyperlite Hi-Fi "The Illest"
CWB AMG Carbon
Phase 5 Razz
Byerly Volt
4.6 Ronix Koal Fish
Phase Five Scamp (kiddos)
-
03-19-2017, 06:17 PM #8Member
- Join Date
- Jul 2009
- Location
- Syracuse Utah
- Posts
- 93