Over Engine Tray Mod

[Bonte4]

I am about to get one built out of Aluminum for my Supra SE450 in the next week. Actually been looking at having it done for a while on the Supra's there is about 8 inches depth that is available. Since I have custom bags much of room is gone for storage and i was planning on using the Storage Tray for Rops, Box Anchor and Buoy's. You can go to metal fabrication shop and they can build you something that fits perfect Metal is cheaper, Aluminum will cost more.

Supra SE Storage Tray

Post some pics when its done and I'd be interested to know est. cost for the aluminum, thx!

[jmvotto]

brett . can you see what the a24 item number is on this , I reached out to bakes online to see if they could source some direct depending on measurements

great mod BTW

[jmvotto]

so rough numbers are 35 x28 with a one inch lip? on the tray with 3.75 to 3.25 depth with slope

[Bonte4]

Depth on my Mondo with Raptor motor is significantly less than 8", id say closer to 4". Not sure if having at tray that sits 1/2 in. or less from the top of the motor is functional?

[lsupcar]

IMG_3068.jpg
I measured 5 3/8" on my 2015 mojo with the raptor.

[Bonte4]

Just measured my Mondo, only about 3" so not a option for me, ugh.


Sent from my iPhone using Tapatalk

[lsupcar]

Do we know the dimensions of the Axis A24 engine tray originally referenced?

[moombahighrider]

Here are some photos with dimensions of the tray. I just ordered it.









Looks like it's going to fit really well in the mojo.

[jmvotto]

you have an item number# to reference on the Bill of sale

[moombahighrider]

you have an item number# to reference on the Bill of sale

SMB54410361

I found one in Kelowna, BC. Shipping it to me was the expensive part.