Results 1 to 10 of 47
Thread: Over Engine Tray Mod
-
03-05-2017, 09:36 PM #1
Senior Member
- Join Date
- May 2014
- Location
- Palm Desert, CA
- Posts
- 1,541
Over Engine Tray Mod
So one of my buddies on instagram sent me over pics of his latest mod on his 14 Mondo.
He got an Axis A24 engine tray that was a near perfect fit. Added L brackets to hold in place, notched for the shock & bingo bango.
$179 local Axis dealer
Anyone know if the 14 & 15s have the same engine dimensions? I don't think the 14s have the raptor motor. So not sure if my motor sits higher up or not (boat is in storage 3hrs away)
Sent from my iPhone using TapatalkLast edited by BrettLee3232; 03-05-2017 at 09:42 PM.
2015 Mondo
Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS
2079 Prop
Auto Flow 2.0
Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers
-
03-05-2017, 09:37 PM #2
Senior Member
- Join Date
- May 2014
- Location
- Palm Desert, CA
- Posts
- 1,541
Sent from my iPhone using Tapatalk2015 Mondo
Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS
2079 Prop
Auto Flow 2.0
Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers
-
03-05-2017, 09:51 PM #3
Senior Member
- Join Date
- Apr 2013
- Location
- Knoxville TN
- Posts
- 3,078
Very cool mod. We all try to find as much room as possible on these boats. I recall reading about this last year.
Sent from my P00I using Tapatalk2018 Supra SL400
-
03-05-2017, 10:08 PM #4
Senior Member
- Join Date
- Aug 2011
- Location
- Commerce Lake, MI
- Posts
- 2,145
That's cool. Wonder if it fits the Craz
Sent from my iPad using Tapatalk2017 Moomba Craz
-
03-05-2017, 10:26 PM #5
Senior Member
- Join Date
- Nov 2014
- Location
- Columbus, Ohio
- Posts
- 388
Definitely something I miss from my Axis...will be interested to see if it fits a Craz.
Can your buddy send you dimensions of his engine bay opening so we can compare?Boatless for now
-
03-05-2017, 10:46 PM #6
Senior Member
- Join Date
- Nov 2014
- Posts
- 704
That is awesome. You could always make one with some fleece, a sheet of fiberglass, some resin and a can of box liner. Judging by your other mods, it might be up your alley. Watch a couple youtube tutorials. It's really easy to make custom shapes with a few pieces of wood and fleece. Then again, you might find its not worth your time if the axis bin fits for. $179...
2016 Craz.
Enzo bags.
-
03-24-2017, 01:57 AM #7
Senior Member
- Join Date
- May 2014
- Location
- Palm Desert, CA
- Posts
- 1,541
So I got some measurements from him (2015 Mondo)....
Sent from my iPhone using Tapatalk2015 Mondo
Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS
2079 Prop
Auto Flow 2.0
Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers
-
03-24-2017, 01:58 AM #8
Senior Member
- Join Date
- May 2014
- Location
- Palm Desert, CA
- Posts
- 1,541
Anyone want to measure their 15 Mondo for me? Lol
Sent from my iPhone using Tapatalk2015 Mondo
Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS
2079 Prop
Auto Flow 2.0
Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers
-
05-01-2017, 08:19 AM #9
Junior Member
- Join Date
- Mar 2017
- Posts
- 25
Any update on fitment with Raptor motors? I just picked up a 17 Mondo and after seeing the tray in my buddies MB Id really like to make this happen but as suggested, not sure if the Raptor motor would allow for the tray?
-
05-01-2017, 05:54 PM #10
Member
- Join Date
- Aug 2016
- Posts
- 54
I am about to get one built out of Aluminum for my Supra SE450 in the next week. Actually been looking at having it done for a while on the Supra's there is about 8 inches depth that is available. Since I have custom bags much of room is gone for storage and i was planning on using the Storage Tray for Rops, Box Anchor and Buoy's. You can go to metal fabrication shop and they can build you something that fits perfect Metal is cheaper, Aluminum will cost more.
Supra SE Storage Tray
Reply With Quote