Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default Roswell Swivel Racks

    Anyone have an issue with the swivel racks swiveling when not depressing the release?

    Had a few instances yesterday when my passengers almost took a board to the head when the rack decided to swivel on it's own...

    Sent from my SAMSUNG-SM-G935A using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  2. #2
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    2,145

    Default

    So far no


    Sent from my iPhone using Tapatalk
    2017 Moomba Craz

  3. #3
    Join Date
    Aug 2013
    Location
    DFW
    Posts
    857

    Default

    Make sure you really almost slam them into place. If you swivel gently, the pin might not lock
    Matt
    2021 Mojo
    2016 Mojo (sold)
    2012 LSV (sold)

  4. #4
    Join Date
    Sep 2015
    Location
    UT 6000'
    Posts
    1,481

    Default

    I always try and set the pin just to make sure also. It's happened in a different brand boat but not in a Moomba/Supra so far.
    DFTR Josh
    Supra/Moomba
    www.marine-products.com (Discount Code: DFTR-1)

  5. #5

    Default

    Mine do this all the time. My passengers are always helpful and just swing the board racks out after leaving the dock. Once fully out the pin barely holds it in place (as it doesn't come down fully) and they (the passengers) think we're good. I give'r, and then they instantly they swing in. Have had a few close calls, but no ones been injured yet. I've just learned to double check the pins every time.


    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •