Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2003

    Default Rub Rail Cleaning

    The guide pole pads on my trailer have the name of the dealer written on them in white letters. Last weekend I was putting the boat on the trailer in sort of rough water and rubbed up against one of the poles. The lettering on the pad rubbed off and got white stuff on my black rubrail. I tried rubbing it off with some armor all type stuff and that did not work. Anyone have any suggestions? Could you use some type of scotchbrite pad or would that mess up the rubrail? Also, why in the world would they make pole pads that are going to do that? Thanks.

  2. #2
    Brian Raymond Guest

    Default Rubrail

    Try a small area first. Moisten a cloth diaper with laquer thinner to remove the paint from the guide ons, then wipe dry. Go back over the area with a vinyl protector, if you should get paint on the insert again, it should just wipe off, and repeat the above. Brian Raymond

Similar Threads

  1. 07 LSV ski Platform - SS hand rail
    By anabolicone in forum General Chat
    Replies: 5
    Last Post: 08-07-2007, 12:01 AM
  2. Platform Rail
    By jimmygjr in forum General Chat
    Replies: 1
    Last Post: 06-16-2007, 11:50 PM
  3. Rub Rail Cleaning
    By 05mobiusxlv in forum General Chat
    Replies: 7
    Last Post: 06-30-2006, 01:48 PM
  4. rub rail
    By redmobius in forum Service & Repair
    Replies: 2
    Last Post: 08-30-2005, 06:09 AM
  5. Rub rail replacement
    By smokedog2 in forum Service & Repair
    Replies: 0
    Last Post: 01-12-2005, 11:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts