Results 1 to 10 of 25
Thread: Seadek sheets
Hybrid View
-
02-21-2017, 04:38 PM #1
Seadek sheets
I'm a diy guy and even more a cheap one. I have snap in carpet in my Craz and while I don't hate it, I don't love it. I am playing with the idea of putting new flooring in. I had originally thought about using hydroturf because I like the color selection (I was going to do black/dark grey grooved) and especially how soft it is but I worry about it holding up long term. So I wrote seadek and they put me on to sheets they sell where I can make my own kit.
The sheets are $150 each and I would need 2, so 320 shipped. The representative said it was very easy to cut and make to look nice. I asked if I could get it with the lines grooved in and she said no, not with these sheets. So my worry is that it may look unfinished/cheap slapping down seadek without any pattern in it. I had the thought of using a router or cutout tool and making my own grooves in it to give character but I'm not sure. Anyone done their own or have any opinions for me?
Sent from my SAMSUNG-SM-G930A using Tapatalk
-
02-21-2017, 04:39 PM #2
Storm grey is what I was looking at. It would match my walk through over the engine.
The dealer said if I wanted the original craz flooring it would be $1450, I'm good. More than a few hundred I'll just rock the carpet.
Sent from my SAMSUNG-SM-G930A using Tapatalk
-
02-21-2017, 05:06 PM #3
I used some seadek type material on the fenders of my old supra trailer. it looked ok but there's a lot to be said for the stuff cut with a beveled edge.
based on my experience, I would not lay down a floor of a boat but that's imo. most layman might not ever notice that it's not the laser cut beveled edge application.'06 Supra Launch 20SSV-gone but never forgotten
-
02-21-2017, 05:09 PM #4
-
02-21-2017, 07:52 PM #5Senior Member
- Join Date
- Nov 2014
- Location
- Columbus, Ohio
- Posts
- 388
I'm considering this as well. I had the factory not install any carpet snaps so my flooring is all clean, but I plan to SeaDek/Gatorstep or one of the many other options down soon. All comes down to looks vs price. I can do the whole boat myself for under $500 using sheets, or I can have custom fit pieces installed for about $1500.
Boatless for now
-
02-21-2017, 08:14 PM #6
The snaps are actually something I am concerned about too. I have to see if I want to mess with cutting around them and how crappy it could possibly look.im not totally taking the hydro turf off the table as it is really easy to work with and is very soft
Sent from my SAMSUNG-SM-G930A using Tapatalk
-
02-21-2017, 09:23 PM #7
+1 on what Russell said
Sent from my iPhone using Tapatalk2015 Mondo
Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS
2079 Prop
Auto Flow 2.0
Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers
-
02-22-2017, 07:49 AM #8Member
- Join Date
- Oct 2016
- Posts
- 45
Keep in mind that the seadek option when building a new boat is not the same thickness as the stuff most of us have gotten. The stuff they offer when building a boat is the same thin stuff on the swim deck. Did you call scwake and see how much it would be for my template? I'm with Russell, if you slap it down it will look like poo not to mention it is an absolute NIGHTMARE to remove if down the road you just can't take it. We've got over 3k in all of our seadek. The bow, the gunnels, the walkway, the floor, and swim deck. I know it's a lot but I feel like it finishes off the boat!
Sent from my iPhone using Tapatalk
-
02-22-2017, 08:58 AM #9
All I really want/need is the floor and gator step replied that they have the kit already made for a craz for about a grand. I am gonna see if my dealer can do better than that for me. Anyone know what all I'm looking at dealing with the snaps in the floor?
Sent from my SAMSUNG-SM-G930A using Tapatalk
-
02-22-2017, 09:01 AM #10Member
- Join Date
- Oct 2016
- Posts
- 45
With ours they just came out with the screw in the middle then we had the seadek sized to cover the holes
Sent from my iPhone using Tapatalk